01
Inconel 600 Round Bar
Solid round sections for machined components, shafts, fasteners and furnace parts.
View Inconel 600 Round Bar →Inconel 600 Bar and Rod for Heat & Corrosion
UNS N06600 nickel-chromium-iron bar and rod for chemical processing, heat treatment, aerospace, power generation and other demanding high-temperature service.
Certified Inconel 600 Grades
Specifically, we supply fully certified UNS N06600 material with heat-number traceability and complete test documentation.
Custom Bar and Rod
We manufacture Inconel 600 bar and rod to your dimensions, condition and surface finish.
Reliable Global Delivery
Therefore, our team ships worldwide with responsive lead times and complete export documentation.
PRODUCT OVERVIEW
About Inconel 600 Bar and Rod
Inconel 600 bar and rod is a nickel-chromium-iron alloy for heat and corrosion duty. Moreover, it resists oxidation plus many organic and inorganic media. Therefore, fabricators specify Inconel 600 bar for chemical, heat-treatment, aerospace and power-generation parts.
PRODUCT FEATURES
Key Features of Inconel 600 Bar and Rod
Inconel 600 bar and rod is a nickel-chromium-iron alloy that resists corrosion and oxidation across a wide temperature range. UNS N06600 is supplied to ASTM B166 in hot-worked, cold-worked and annealed conditions. Common sections are round, square, hex and flat bar, plus wire, welding wire, hollow bar, threaded rod and billet, all with heat-number traceability.
Inconel 600
High Nickel Corrosion Resistance
Inconel 600 bar and rod resists many organic and inorganic compounds across demanding industrial environments.
01
Chromium Oxidation Resistance
Specifically, chromium improves resistance to oxidizing conditions at elevated temperatures.
02
Chloride SCC Resistance
High nickel content resists chloride-ion stress-corrosion cracking in Inconel 600 bar and rod.
03
High-Temperature Capability
The alloy holds useful mechanical performance from cryogenic conditions up to elevated temperatures.
04
Cold-Work Strengthening
Controlled cold working strengthens Inconel 600 bar and rod instead of precipitation hardening.
05
Good Fabrication Characteristics
Moreover, the material accepts hot and cold working under appropriate processing conditions.
06
Multiple Bar Conditions
We supply hot-worked, cold-worked, annealed and precision-finished Inconel 600 bar and rod.
07
Broad Product Selection
In addition, buyers can specify round, square, hexagonal, flat and custom bar forms.
08
WHY CHOOSE US
Why Choose Inconel 600
When you source Inconel 600 bar and rod, Southerly Alloy acts as your supply partner. Specifically, you get traceable material with heat-number certification under our ISO 9001 system. As a result, we manage your Inconel 600 order end to end.
01
Mill-Certified Material
Inconel 600 bar and rod carries full heat-number traceability with no third-party markups.
02
Certified Quality Systems
ISO 9001 controls our production, and every batch ships with EN 10204 3.1 documentation.
03
Custom Manufacturing
We produce diameters, cut lengths, condition and surface finish to your drawing and order.
04
Reliable Export Service
Furthermore, complete export documentation supports dependable delivery for global shipments.
MANUFACTURING PROCESS
Reliable Production For Critical Applications
We produce Inconel 600 bar and rod from high-quality alloy ingots by controlled melting and remelting. For higher cleanliness, VIM + ESR or VIM + VAR refines the ingot before forging. Finally, we supply finished bar to the applicable ASTM B166 standard.
01
Raw Material Preparation
We select and weigh nickel, chromium and iron charge materials to meet the required UNS N06600 chemistry with controlled impurities.
02
Vacuum Induction Melting (VIM)
Melting under vacuum limits gas pickup and maintains tight control of composition and melt cleanliness.
03
Electroslag Remelting (ESR)
Where specified, ESR refines the electrode through a molten slag layer to reduce inclusions and improve ingot uniformity.
04
Vacuum Arc Remelting (VAR)
For demanding requirements, VAR remelts under a controlled vacuum arc to improve ingot cleanliness and structural consistency.
05
Hot Forging and Rolling
We convert the ingot to billet, then forge or hot roll it to the required bar section with controlled working.
06
Heat Treatment
Annealing develops the specified balance of strength, ductility and workability according to the applicable material specification and ordered condition.
07
Cold Working and Finishing
Cold drawing, peeling or centerless grinding gives tighter dimensions and improved surface finish for bright bar and precision rod.
08
Final Inspection
We verify chemical composition, mechanical properties, dimensions and surface condition, and we complete the agreed inspection documentation before release.
Manufacturing Facility
MANUFACTURING CAPABILITY
Advanced Production For Nickel Alloy Products
Southerly Alloy supplies Inconel 600 bar and rod in common ASTM B166 forms and conditions. Specifically, sections cover round, square, hex, flat and forged bar, plus wire, welding wire, hollow bar, threaded rod and billet. We confirm diameter, length, tolerance and finish against your order.
20,000+ m²
Factory Area
Specifically, modern production facilities and dedicated workshops support Inconel 600 bar and rod output.
50+
Production Machines
Advanced equipment for precision alloy manufacturing of Inconel 600 bar and rod.
600 Tons
Monthly Capacity
Inconel 600 bar and rod output across standard and custom sizes.
30+
Technical Engineers
Experienced engineers who support your Inconel 600 bar and rod specification.
QUALITY ASSURANCE
Strict Quality Control From Production To Delivery
We inspect every Inconel 600 bar and rod batch before release under our ISO 9001 system. Specifically, we check chemistry, mechanical properties, dimensions and surface. Moreover, every delivery ships with EN 10204 3.1 documents, and third-party inspection is available.
01
Chemical Analysis
We verify composition by spectrometer against the required UNS N06600 limits.
02
Mechanical Testing
Tensile, yield, elongation and hardness tests confirm the ordered condition.
03
Dimensional and NDT Checks
We examine size, straightness and surface, with UT / PMI on request.
04
Documentation
Every delivery carries an EN 10204 3.1 mill test certificate with heat-number traceability.
PRODUCT FORMS
Available Product Forms
We supply Inconel 600 bar and rod in round, square, hex, flat and forged sections to ASTM B166. Specifically, each form below links to a dedicated Inconel 600 page.
02
Inconel 600 Bright Bar
Bright-finished bar for applications that need improved surface and dimensional control.
View Inconel 600 Bright Bar →
03
Inconel 600 Forged Bar
Larger or shaped sections with a controlled wrought structure.
View Inconel 600 Forged Bar →
04
Inconel 600 Square Bar
Square sections for supports, fixtures and machined components.
View Inconel 600 Square Bar →
05
Inconel 600 Hex Bar
Hexagonal bar for precision machining and multi-flat components.
View Inconel 600 Hex Bar →
06
Inconel 600 Flat Bar
Flat and rectangular sections where you specify width and thickness for fabrication.
View Inconel 600 Flat Bar →
07
Inconel 600 Wire
Annealed, regular and spring temper wire from 0.2 to 12 mm for mesh, springs and cold forming.
View Inconel 600 Wire →
08
Inconel 600 Welding Wire
ERNiCr-3 bare wire plus ENiCrFe-2/ENiCrFe-3 covered electrodes for welding Inconel 600.
View Inconel 600 Welding Wire →
09
Inconel 600 Hollow Bar
Thick-wall hollow sections for bushings, sleeves and cylinder components.
View Inconel 600 Hollow Bar →
10
Inconel 600 Threaded Rod
Fully threaded rod in metric and unified threads for high-temperature fastening.
View Inconel 600 Threaded Rod →
11
Inconel 600 Billet
Square and round billet stock for downstream forging, ring rolling and machining.
View Inconel 600 Billet →
APPLICATIONS
Engineered For Demanding Industries
Engineers specify Inconel 600 bar and rod wherever components face heat, oxidation or corrosive media together. Specifically, typical industries include chemical processing, heat treatment, aerospace, nuclear and power generation.
Discuss Your Application →
01
Chemical Processing Equipment
Components work in corrosive chemical media at elevated temperatures.
02
Heat-Treatment Equipment
Furnace fixtures, retorts, muffles, baskets and trays need oxidation and heat resistance.
03
Aerospace Components
Inconel 600 bar and rod serves selected engine, airframe and high-temperature parts.
04
Nuclear Equipment
UNS N06600 material fits selected reactor and primary-water applications.
05
Power Generation
Solid alloy components face heat, oxidation and demanding operating conditions.
06
Electronic Components
Precision Inconel 600 rod gives corrosion resistance and dimensional stability.
07
Chemical Heaters and Condensers
These components handle heat and chemical exposure together.
08
Petrochemical Equipment
Nickel alloy 600 bar serves processing equipment in aggressive environments.
TECHNICAL INFORMATION
Technical Specifications
Detailed technical information including chemical composition, mechanical properties, standards and available dimensions.
Chemical Composition
The composition limits below follow published ASTM B166-related data for UNS N06600. However, the governing purchase specification always takes precedence for final acceptance on bar and rod.
| Element | Content |
|---|---|
| Nickel (Ni) | 72.0% min. |
| Chromium (Cr) | 14.0–17.0% |
| Iron (Fe) | 6.0–10.0% |
| Carbon (C) | 0.15% max. |
| Manganese (Mn) | 1.00% max. |
| Silicon (Si) | 0.50% max. |
| Sulfur (S) | 0.015% max. |
| Copper (Cu) | 0.50% max. |
Mechanical Properties
For ASTM B166 UNS N06600 rods and bars in the cold-worked annealed or hot-worked annealed condition, specified minimum values are 550 MPa tensile strength, 240 MPa yield strength and 30% elongation.
| Condition | Tensile Strength | Yield Strength, 0.2% Offset | Elongation |
|---|---|---|---|
| Cold-worked / hot-worked, annealed | ≥80 ksi (550 MPa) | ≥35 ksi (240 MPa) | ≥30% |
| Hot-worked, as worked* | ≥85–95 ksi (585–655 MPa) | ≥35–45 ksi (240–310 MPa) | ≥20–30% |
| Cold-worked, as worked* | ≥105–120 ksi (725–825 MPa) | ≥80–90 ksi (550–620 MPa) | ≥7–12% |
- Cold-worked and hot-worked as-worked requirements vary with product form and diameter. The applicable ASTM B166 condition and dimension govern final acceptance.
Physical Properties
| Property | Value |
|---|---|
| Alloy | Inconel 600 |
| UNS | N06600 |
| Werkstoff | 2.4816 |
| Density | Approx. 8.47 g/cm³ |
| Melting Range | Approx. 1370–1413°C |
| Alloy Type | Nickel-chromium-iron |
| Strengthening | Solid solution / cold work |
Standards
| Standard | Product / Application |
|---|---|
| ASTM B166 | Nickel-chromium-iron alloy rod, bar and wire |
| ASME SB166 | ASME specification for rod, bar and wire |
| SAE AMS 5665 | Nickel alloy 600 bar, rod and related wrought products |
| BS 3076 NA14 | Nickel alloy bar |
| DIN 17742 | Nickel alloy wrought products |
| DIN 17750 / 17754 | Related nickel alloy product specifications |
| ISO 9723 | Nickel and nickel alloy bar |
| ISO 9724 | Nickel and nickel alloy wire and drawing stock |
| ISO 9725 | Nickel and nickel alloy forgings |
ASTM B166 is the principal specification for Inconel 600 bar and rod. In addition, SAE AMS 5665 governs much aerospace-related procurement of Inconel 600 bar and rod.
Dimensions
| Product Form | Typical Supply | Length |
|---|---|---|
| Round Bar | 6–500 mm dia. | Single Random, Double Random or Custom |
| Round Rod | 3–50 mm dia. | Single Random, Double Random or Custom |
| Bright Bar | 6–150 mm dia. | Single Random, Double Random or Custom |
| Square Bar | 10–150 mm | Single Random, Double Random or Custom |
| Hex Bar | 10–150 mm A/F | Single Random, Double Random or Custom |
| Flat Bar | 3–100 mm thick × 10–300 mm wide | Single Random, Double Random or Custom |
| Forged Bar | 100–500 mm dia. or custom forged section | Custom |
| Precision-Ground Rod | 3–100 mm dia., tight tolerance | Custom |
Available dimensions depend on the manufacturing route, standard, material condition, and order quantity. Please confirm your required diameter, section, and length in the inquiry.
Surface Finishes
| Surface Condition | Typical Application |
|---|---|
| Hot Finished | Supplied in the as-hot-worked condition; suitable for general industrial applications and subsequent machining |
| Cold Drawn | Improved dimensional accuracy and surface finish, with increased strength from cold working |
| Bright Finished | Smooth, bright surface with improved dimensional control; suitable for applications requiring a cleaner surface appearance |
| Peeled | Machined surface with controlled diameter and improved surface uniformity, typically supplied for further machining or finishing |
| Centerless Ground | Precision-ground surface with close dimensional tolerances and consistent diameter |
| Polished | Fine surface finish for applications requiring reduced surface roughness and improved appearance |
| Rough Turned | Machined surface used for large-diameter or forged bars, providing controlled dimensions with machining allowance for further processing |
TECHNICAL DOCUMENTATION
Download Technical Datasheet
Get detailed information including specifications, standards, dimensions and material properties.
HOW TO START
Start Your Order in 6 Simple Steps
From first inquiry to delivered material, a transparent process keeps you informed at every stage. Therefore, most Inconel 600 bar orders move from inquiry to shipment in under three weeks.
1
Send Your Inquiry
Provide your Inconel 600 grade, product form, diameter, length, quantity and required standard.
2
Confirm the Specification
State ASTM B166, ASME SB166 or AMS 5665 together with the material condition and finish.
3
Review the Quotation
Receive pricing based on dimensions, quantity, manufacturing route, inspection and destination.
4
Confirm the Order
Approve the technical specification, commercial terms, documentation and production schedule.
5
Production and Inspection
We manufacture and inspect your Inconel 600 bar and rod to the agreed specification.
6
Shipment and Documentation
Receive the material with MTC, heat-number traceability and export documentation.
CERTIFICATIONS & QUALITY DOCUMENTATION
Certifications & Quality Documentation
Our production and inspection processes are certified to international standards, and every delivery ships with EN 10204 3.1 mill test certificates.
ISO 9001:2015
Quality Management System
PED 2014/68/EU
Pressure Equipment Directive
ASTM / ASME
Material Standards Compliance
EN 10204 3.1
Mill Test Certificates
FAQ
Frequently Asked Questions
Which ASTM specification applies to Inconel 600 bar and rod?
ASTM B166/SAE AMS 5665.
What is your MOQ for Inconel 600 bar?
One piece for many common sizes.
What are your trade terms for Inconel 600 bar?
We mainly quote on FOB terms; EXW and CIF are also available.
How is the price of Inconel 600 bar calculated?
Mainly based on weight.
What is the lead time for Inconel 600 bar?
Stock sizes ship in 7-15 days. Customized in 25 days.
Do you provide EN 10204 3.1 or 3.2 certificates?
Yes. We can provide EN 10204 3.1 certificates and 3.2 certificates as required.
Can you supply custom sizes and surface finishes?
Yes. We supply Inconel 600 bars in custom sizes and finishes, including cold-drawn, peeled and precision-ground bright bar.
What export documentation is included with my Inconel 600 bar shipment?
Every shipment includes CI, PL, B/L, and MTC, and we arrange certificates of origin on request.
Can I request a sample or trial order?
Yes. We provide samples on request and accept trial orders for many standard sizes.
REQUEST FOR QUOTATION
Need A Custom Alloy Solution?
Southerly Alloy supplies Inconel 600 bar and rod to ASTM B166 in standard and custom sizes. Send your Inconel 600 grade, dimensions, quantity and delivery needs to receive a quotation. Moreover, our team confirms the condition and finish, then returns pricing with clear Incoterms.
