Nickel Plate and Sheet
Nickel plates & sheets supplied to ASTM B162 - stock, custom sizes, global export.
Our Nickel plate and sheet collection brings together Nickel 200 and 201 - supplied as hot-rolled and cold-rolled plate and sheet for corrosive, high-temperature and strength-critical service across chemical, energy, marine and process industries.
Nickel 200 and 201 are commercially pure nickel with high thermal and electrical conductivity, excellent resistance to caustic alkalis and many neutral or reducing salts, and good ductility for forming. 201 is the low-carbon version for service above 315 C to avoid graphitisation.
We supply Nickel plate and sheet from about 0.5 mm sheet up to 50 mm plate, in stock and custom-rolled widths, in the hot-rolled or cold-rolled, solution-annealed (or age-hardened for precipitation-hardened grades), with ends, surface and tolerances prepared to order. Stock items, cut-to-length and made-to-order dimensions are available, every lot shipped with EN 10204 3.1 mill test certificate and third-party inspection on request.
Below is the grade-by-grade specification overview, the industries we typically serve, and answers to common supply questions before you request a quote.
Products in this collection
Specifications & Standards
| Grade | UNS | Primary ASTM | Typical condition / size |
|---|---|---|---|
| Nickel 200 | N02200 | B162 | HR/CR, annealed, 0.5-50 mm |
| Nickel 201 | N02201 | B162 | HR/CR, annealed, 0.5-50 mm |
Standards above are the most common procurement specifications; equivalents such as AMS, EN or GB may be supplied on request. Confirm the exact standard and condition for your grade before ordering.
Applications
Nickel plate and sheet are formed into vessels, liners and structural parts for aggressive service:
Caustic soda (chlor-alkali)
anode brackets, cell covers and caustic handling (200, 201).
Food & chemical processing
pure-nickel equipment for alkaline and food contact (200).
Electronics & plating
cathode and anode components, plating rolls (200, 201).
Thermal & electrical
conductors and heat-exchanger parts needing high conductivity (200).
Aerospace & instrumentation
corrosion-resistant, formable parts (201).
Frequently Asked Questions
What thickness range can you supply for Nickel plate and sheet?
Plate and sheet from from about 0.5 mm sheet up to 50 mm plate, in stock and custom-rolled widths; both stock and custom sizes are available, cut to length.
What is the minimum order quantity?
Stock sizes from one piece; mill lengths or heavy plate are priced per project. Tell us the grade, size and quantity for a quote.
Do you provide MTC / EN 10204 3.1?
Yes - every lot ships with EN 10204 3.1 mill test certificate, and third-party inspection can be arranged.
What is the typical lead time?
Stock items ship within days; made-to-order material is typically a few weeks depending on size, condition and certification.
Can you supply non-standard sizes or conditions?
Yes - custom sizes, non-standard walls or special tempers are available on request; we also offer cutting and surface preparation.
What is the difference between 200 and 201?
200 is commercially pure nickel for most caustic and forming service; 201 is the low-carbon version for continuous service above 315 C, where 200 could graphitise. Use 201 for high-temperature pure-nickel duty.
