Alloy Plate and Sheet
Alloy plates & sheets supplied to ASTM B463 - stock, custom sizes, global export.
Our Alloy plate and sheet collection brings together Alloy 20 and 59 - supplied as hot-rolled and cold-rolled plate and sheet for corrosive, high-temperature and strength-critical service across chemical, energy, marine and process industries.
This collection covers corrosion-resistant specialty nickel alloys beyond the named families. Alloy 20 (20Cb-3) resists sulphuric acid and chloride pitting with niobium stabilisation; Alloy 59 is a high-chromium, molybdenum-rich alloy with exceptional resistance to oxidising acids, chlorides and crevice corrosion, with tolerance close to the C-series.
We supply Alloy plate and sheet from about 0.5 mm sheet up to 50 mm plate, in stock and custom-rolled widths, in the hot-rolled or cold-rolled, solution-annealed (or age-hardened for precipitation-hardened grades), with ends, surface and tolerances prepared to order. Stock items, cut-to-length and made-to-order dimensions are available, every lot shipped with EN 10204 3.1 mill test certificate and third-party inspection on request.
Below is the grade-by-grade specification overview, the industries we typically serve, and answers to common supply questions before you request a quote.
Products in this collection
Specifications & Standards
| Grade | UNS | Primary ASTM | Typical condition / size |
|---|---|---|---|
| Alloy 20 | N08020 | B463 | HR/CR, annealed, 0.5-50 mm |
| Alloy 59 | N06059 | B575 | HR/CR, annealed, 0.5-50 mm |
Standards above are the most common procurement specifications; equivalents such as AMS, EN or GB may be supplied on request. Confirm the exact standard and condition for your grade before ordering.
Applications
Alloy plate and sheet are formed into vessels, liners and structural parts for aggressive service:
Chemical & petrochemical
sulphuric acid plants, pickling equipment and reactors (Alloy 20).
Pollution control & FGD
scrubbers and ducts in mixed acid/chloride service (Alloy 59).
Pharmaceutical & food
high-purity, corrosion-resistant process parts (Alloy 20).
Marine & offshore
seawater and brine handling with strong pitting resistance (Alloy 59).
Heat exchangers & vessels
aggressive multi-acid environments (Alloy 20, 59).
Frequently Asked Questions
What thickness range can you supply for Alloy plate and sheet?
Plate and sheet from from about 0.5 mm sheet up to 50 mm plate, in stock and custom-rolled widths; both stock and custom sizes are available, cut to length.
What is the minimum order quantity?
Stock sizes from one piece; mill lengths or heavy plate are priced per project. Tell us the grade, size and quantity for a quote.
Do you provide MTC / EN 10204 3.1?
Yes - every lot ships with EN 10204 3.1 mill test certificate, and third-party inspection can be arranged.
What is the typical lead time?
Stock items ship within days; made-to-order material is typically a few weeks depending on size, condition and certification.
Can you supply non-standard sizes or conditions?
Yes - custom sizes, non-standard walls or special tempers are available on request; we also offer cutting and surface preparation.
How do Alloy 20 and Alloy 59 compare?
Alloy 20 resists sulphuric acid and chloride pitting with niobium stabilisation; Alloy 59 is a higher-chromium, molybdenum-rich grade with broader tolerance to oxidising acids and crevice corrosion. Choose 59 for the most aggressive mixed-acid duty.
