01
Annealed Inconel 601 Wire
Soft annealed Inconel 601 wire that weaves, forms and redraws without cracking.
Request Availability →Inconel 601 Wire
Nickel-chromium-aluminium wire from 0.2 to 12 mm in annealed and cold-drawn states for mesh, springs and hot-formed fixtures.
Heat-Level Traceability
Every Inconel 601 wire order is keyed to its melting heat number on the EN 10204 3.1 certificate.
Condition Matched to Duty
Specifically, we set the annealed or hot-finished state of your Inconel 601 wire against the service temperature you declare.
Export Papers in One Set
Moreover, Inconel 601 wire ships with packing list, mill certificate and export documents together.
PRODUCT OVERVIEW
About Inconel 601 Wire
Inconel 601 wire ships in UNS N06601, a nickel-chromium-iron alloy with 1.0 to 1.7% aluminium. Aluminium builds a sub-scale under the chromia layer of Inconel 601 wire, resisting spalling. As a result, this wire outlasts heat-resistant steels in furnace atmospheres.
We supply Inconel 601 wire to ASTM B166 and ASME SB166 in annealed, hot-finished and cold-drawn conditions. Every Inconel 601 wire order arrives with heat-number records and EN 10204 3.1 paperwork for incoming checks. Moreover, cut lengths and surface finishes for Inconel 601 wire are agreed before production starts.
Meanwhile, the full UNS N06601 chemistry behind Inconel 601 wire is set out on our Inconel 601 material page for cross-reference.
PRODUCT FEATURES
Key Features of Inconel 601 Wire
Inconel 601 wire is supplied in UNS N06601, the nickel-chromium-iron alloy whose aluminium addition stabilizes oxide scale at extreme temperature. We provide ASTM B166 and ASME SB166 wire from 0.2 to 12 mm in annealed and cold-drawn states for furnace builders, heat-treatment shops and petrochemical plants. Every Inconel 601 wire order carries heat-number traceability, EN 10204 3.1 mill test reports and export documentation.
Inconel 601
Wide Condition Range
For example, Inconel 601 wire ships annealed, cold-drawn or spring temper.
01
Fine Diameter Capability
Specifically, Inconel 601 wire draws to fine sizes for weaving and filtration.
02
Scale-Stable Surface
In addition, Inconel 601 wire holds a stable surface through repeated hot exposure.
03
Carburizing Duty Fit
Moreover, woven Inconel 601 wire serves inside carburizing fixture assemblies.
04
Consistent Coiling
We wind Inconel 601 wire spools with controlled layering for smooth feeding.
05
Annealed Formability
Annealed Inconel 601 wire bends and wraps without cracking during fabrication.
06
Full Traceability
Every Inconel 601 wire coil carries heat numbers and EN 10204 3.1 documents.
07
WHY CHOOSE US
Why Choose Inconel 601
Sourcing Inconel 601 wire depends on a partner who reads furnace duty as carefully as chemistry. Southerly Alloy manages your Inconel 601 wire enquiry from duty review through export packing.
01
Duty-First Quoting
We record your peak temperature and atmosphere before proposing an Inconel 601 wire condition.
02
Documentation per Order
Specifically, certificates, PMI records and packing lists travel with each Inconel 601 wire delivery.
03
Cut-to-Order Range
In addition, we supply single trial pieces and container lots of Inconel 601 wire through one route.
04
Commitment in Writing
Quotations for Inconel 601 wire state condition, size and documents rather than vague availability.
MANUFACTURING PROCESS
Reliable Production For Critical Applications
From charge weighing to spooling, Inconel 601 wire follows a controlled drawing route. We document each Inconel 601 wire stage against its heat number.
01
Charge Weighing
We weigh nickel, chromium and iron so the Inconel 601 wire melt meets UNS N06601 limits.
02
Primary Melting
First, we melt the charge and cast Inconel 601 wire electrode stock.
03
Hot Rolling to Rod
Next, hot rolling reduces the cast Inconel 601 wire into drawing rod.
04
Annealing and Descaling
Then, we anneal and descale the Inconel 601 wire rod before drawing begins.
05
Wire Drawing
After that, successive dies bring Inconel 601 wire down to the ordered diameter.
06
Final Anneal or Temper
Subsequently, we soften annealed Inconel 601 wire or hold cold work for temper.
07
Coiling and Packing
We wind Inconel 601 wire onto coils and spools with controlled layering.
08
Inspection and Release
Finally, we confirm Inconel 601 wire chemistry and strength, then issue the certificate.
Manufacturing Facility
MANUFACTURING CAPABILITY
Advanced Production For Nickel Alloy Products
Southerly Alloy supplies Inconel 601 wire across the common ASTM B166 forms and conditions. We confirm Inconel 601 wire size, length, straightness and finish against your order before production. Moreover, wire sits inside our Inconel 601 bar and rod program.
20,000+ m²
Factory Area
Specifically, nickel alloy melting, annealing and inspection facilities for Inconel 601 wire under one roof.
50+
Production Machines
Equipment covering hot working, solution annealing and cold finishing for Inconel 601 wire.
600 Tons
Monthly Capacity
Inconel 601 wire output across stock and made-to-order sizes.
30+
Technical Engineers
Metallurgists who match the annealing condition of Inconel 601 wire to your furnace duty.
30+ Countries
Export Reach
In addition, documented logistics carry Inconel 601 wire worldwide.
QUALITY ASSURANCE
Strict Quality Control From Production To Delivery
Every Inconel 601 wire batch is inspected before release under our ISO 9001 system. In addition, we check Inconel 601 wire chemistry, mechanical properties, dimensions and surface against the ordered specification.
01
Grade Verification
We confirm Inconel 601 wire grade and heat against your purchase order.
02
Dimensional Inspection
Specifically, we check Inconel 601 wire size, length and straightness against standard and drawing tolerances.
03
Testing Arrangement
In addition, tensile, hardness and NDT tests run where your Inconel 601 wire specification requires.
04
Certificate Issue
Every Inconel 601 wire delivery includes EN 10204 3.1 documents keyed to heat numbers.
PRODUCT FORMS
Available Product Forms
Different conditions and variants of Inconel 601 wire suit different machining and service needs. Therefore, the list below shows the Inconel 601 Wire variants we quote most often.
02
Cold-Drawn Wire
Cold-drawn Inconel 601 wire with higher strength for screens and parts.
Request Availability →
03
Spring Temper Wire
Spring-temper Inconel 601 wire for coils holding load at temperature.
Request Availability →
04
Fine Wire
Inconel 601 fine wire for weaving and filtration media.
Request Availability →
05
Straightened and Cut Wire
Inconel 601 wire straightened and cut for cold-forming blanks.
Request Availability →
06
Wire Rod
Inconel 601 rod stock from 6.0 to 20.0 mm feeding downstream redraw lines.
Request Availability →
07
Custom Wire
Custom Inconel 601 wire made to your diameter, temper and packing callout.
Request Availability →
APPLICATIONS
Engineered For Demanding Industries
Inconel 601 wire is chosen where hot atmospheres meet woven or formed parts. Specifically, the applications below show where Inconel 601 wire serves.
Discuss Your Application →
01
Woven Fixture Mesh
Inconel 601 wire weaves into mesh used inside carburizing fixtures.
02
High-Temperature Springs
Spring-temper Inconel 601 wire forms coils holding load near heat.
03
Kiln Conveyor Mesh
Wire supports conveyor belting running through hot kilns.
04
Filtration in Hot Gas
Inconel 601 wire builds filter elements for hot gas streams.
05
Cold-Formed Fasteners
Annealed Inconel 601 wire cold-heads into high-temperature fasteners.
06
Thermocouple Hardware
Wire makes support and tie parts for hot gas temperature sensing.
07
Burner Mesh Components
Inconel 601 wire forms mesh parts sitting near flame paths.
08
Custom Cold Forming
Annealed Inconel 601 wire supports bespoke forming and coiling programs.
TECHNICAL INFORMATION
Technical Specifications
Detailed technical information including chemical composition, mechanical properties, standards and available dimensions.
Chemical Composition
ASTM B166 sets 58.0–63.0% nickel and 21.0–25.0% chromium for UNS N06601, and it orders this wire to an aluminium band of 1.0–1.7%. Above all, that aluminium level is what builds the protective oxide on this wire at temperature.
Indeed, the full composition table on the Inconel 601 material page lists every element against its ASTM B166 limit for this wire.
Mechanical Properties
Typical room-temperature ranges for UNS N06601 wire appear below, drawn from published alloy references. The ordered temper and diameter decide the acceptance values for Inconel 601 wire.
| Condition | Tensile Strength | Yield Strength, 0.2% Offset | Elongation |
|---|---|---|---|
| Annealed | 80–115 ksi (550–790 MPa) | 30–60 ksi (205–415 MPa) | 35–65% |
| Cold-drawn | 120–205 ksi (825–1415 MPa) | 100–195 ksi (690–1345 MPa) | 3–20% |
- Spring-temper Inconel 601 wire reaches 180–210 ksi (1240–1448 MPa) in fine diameters per published wire data; yield values are quoted per diameter on request.
Physical Properties
Published references give this wire a density near 8.11 g/cm³, a melting range of 1360–1411 °C and an elastic modulus near 206 GPa. Moreover, the non-magnetic behaviour of this wire holds right through its working range.
In addition, the physical properties table on the Inconel 601 material page carries the electrical resistivity, the thermal expansion and the remaining design values behind this wire.
Delivery Conditions
Therefore, Inconel 601 wire ships in the delivery states below. Specifically, hot-rolled states supply drawing stock, while cold-drawn states are finished product wire.
| Delivery State | Typical Diameter | Notes |
|---|---|---|
| Hot rolled wire rod | 6.0–20.0 mm | Drawing stock with mill scale, for redraw |
| Hot rolled, annealed | 5.5–19 mm | Coil form, softened for downstream forming |
| Hot rolled, annealed and pickled | 5.5–19 mm | Descaled to a bright surface |
| Cold drawn, annealed | 0.2–12 mm | Softest product wire, best ductility |
| Cold drawn, temper | 0.2–12 mm | Higher strength for screens and formed parts |
Delivery note: hot-rolled states ship as coiled wire rod for redraw, while finished product wire ships per ASTM B166 in the annealed or cold-drawn state.
Standards
ASTM B166 is the principal UNS N06601 wire document for this wire, issued by ASTM International. Moreover, DIN 17753 and ISO 9724 serve European procurement of this wire.
| Standard | Product or Application |
|---|---|
| ASTM B166 | Nickel-chromium-iron alloy rod, bar and wire |
| ASME SB166 | ASME counterpart for pressure equipment |
| DIN 17753 | Wrought nickel alloy wire, properties |
In short, the full standards list on the Inconel 601 material page adds the European designations and the remaining product documents for this wire.
Dimensions
Therefore, Inconel 601 wire dimensions depend on the manufacturing route, standard and order quantity. The table below lists typical supply ranges; please confirm your size in the inquiry.
| Product Form | Typical Supply | Length |
|---|---|---|
| Wire (Coil / Spool) | 0.2–12 mm dia., typical | Coil, spool or custom |
| Wire Rod (Drawing Stock) | 6.0–20.0 mm dia. | Coil |
| Fine Wire | 0.10–0.80 mm dia. | Spool |
| Straightened and Cut Wire | 1.0–12 mm dia. | Straight lengths |
| Custom Wire | To drawing | Custom |
Available wire dimensions depend on the manufacturing route, standard, material condition and order quantity. Please confirm your required wire size, section and length in the inquiry.
Surface Finishes
Therefore, the surface condition decides how this wire machines, welds and sheds scale in service. Specifically, we agree the finish on this Inconel 601 wire with your order.
| Surface Condition | Typical Use |
|---|---|
| Bright Annealed | Protective-atmosphere annealing leaves this Inconel 601 wire oxide-free. |
| Pickled | Acid cleaning descaled this Inconel 601 wire after annealing. |
| Coated | A light lubricant coating on this wire for downstream redrawing. |
Meanwhile, the surface finishes table on the Inconel 601 material page lists the remaining conditions we quote for this wire.
Related forms from the same heat cover Inconel 601 Bright Bar, Inconel 601 Centreless-Ground Rod and Inconel 601 Cold-Drawn Bar when your wire order needs them.
TECHNICAL DOCUMENTATION
Download Technical Datasheet
Get detailed information including specifications, standards, dimensions and material properties.
HOW TO START
Start Your Order in 6 Simple Steps
One coordinator keeps your Inconel 601 wire order moving from enquiry to shipment. Therefore, most Inconel 601 wire orders move from quotation to delivery inside three weeks.
1
Send Your Enquiry
Send the Inconel 601 wire size, quantity, standard and duty temperature.
2
Confirm the Specification
State the ASTM B166 condition and finish your Inconel 601 wire parts require.
3
Review the Quotation
Receive Inconel 601 wire pricing by dimension, quantity and destination.
4
Approve the Order
Approve the Inconel 601 wire specification, terms and schedule in writing.
5
Production and Inspection
We produce and inspect your Inconel 601 wire to the agreed route.
6
Shipment and Papers
Receive Inconel 601 wire with the mill certificate and export documentation.
CERTIFICATIONS & QUALITY DOCUMENTATION
Certifications & Quality Documentation
Our production and inspection processes are certified to international standards, and every delivery ships with EN 10204 3.1 mill test certificates.
ISO 9001:2015
Quality Management System
PED 2014/68/EU
Pressure Equipment Directive
ASTM / ASME
Material Standards Compliance
EN 10204 3.1
Mill Test Certificates
FAQ
Frequently Asked Questions
Which ASTM specification applies to Inconel 601 Wire?
ASTM B166 and ASME SB166 cover Inconel 601 wire, with DIN 17753 and ISO 9724 serving European wire procurement.
What diameters does Inconel 601 wire span?
Typical Inconel 601 wire product wire runs from 0.2 to 12 mm, and drawing stock spans 6.0 to 20.0 mm.
Which conditions are available for Inconel 601 wire?
Inconel 601 wire ships annealed or cold-drawn, with spring temper quoted per diameter on request.
How is the price of Inconel 601 wire calculated?
Pricing follows weight for Inconel 601 wire, with the prevailing nickel surcharge applied at quotation.
What is your MOQ for Inconel 601 wire?
One spool covers many common Inconel 601 wire diameters.
What are your trade terms for Inconel 601 wire?
FOB covers most Inconel 601 wire orders, and EXW or CIF terms are available on request.
What is the lead time for Inconel 601 wire?
Stock Inconel 601 wire sizes ship in 7 to 15 days, while custom drawing takes longer.
Do you provide EN 10204 3.1 or 3.2 certificates for Inconel 601 wire?
Yes. Every Inconel 601 wire coil ships with 3.1, and 3.2 endorsement is booked through the order.
Do strength values hold after straightening Inconel 601 wire?
No. Cold-worked Inconel 601 wire values lapse after straightening and cutting, so order the temper your parts need.
What information should an Inconel 601 wire enquiry include?
Please send wire diameter, temper, coil weight, standard and destination to receive an accurate Inconel 601 wire quotation.
REQUEST FOR QUOTATION
Need A Custom Alloy Solution?
Inconel 601 wire from Southerly Alloy covers standard and custom supply to ASTM B166. Send your Inconel 601 wire size, quantity, condition and destination to receive a quotation.
Specifically, we review your Inconel 601 wire specification, confirm the annealing route, and return pricing with clear terms. Production follows the approved Inconel 601 wire specification, and each delivery ships with complete documentation.
