01
Cold-Drawn Round Bar
Cold-drawn Inconel 601 round bar for precision-turned components.
Request Availability →Inconel 601 Cold-Drawn Bar
Nickel-chromium-aluminium cold-drawn bar to ASTM B166 with closer diameter control and higher strength for machined components.
Heat-Level Traceability
Every Inconel 601 cold-drawn bar order is keyed to its melting heat number on the EN 10204 3.1 certificate.
Condition Matched to Duty
Specifically, we set the annealed or hot-finished state of your Inconel 601 cold-drawn bar against the service temperature you declare.
Export Papers in One Set
Moreover, Inconel 601 cold-drawn bar ships with packing list, mill certificate and export documents together.
PRODUCT OVERVIEW
About Inconel 601 Cold-Drawn Bar
Inconel 601 cold-drawn bar ships in UNS N06601, a nickel-chromium-iron alloy with 1.0 to 1.7% aluminium. Aluminium builds a sub-scale under the chromia layer of Inconel 601 cold-drawn bar, resisting spalling. As a result, this cold-drawn bar outlasts heat-resistant steels in furnace atmospheres.
We supply Inconel 601 cold-drawn bar to ASTM B166 and ASME SB166 in annealed, hot-finished and cold-drawn conditions. Every Inconel 601 cold-drawn bar order arrives with heat-number records and EN 10204 3.1 paperwork for incoming checks. Moreover, cut lengths and surface finishes for Inconel 601 cold-drawn bar are agreed before production starts.
Meanwhile, the full UNS N06601 chemistry behind Inconel 601 cold-drawn bar is set out on our Inconel 601 material page for cross-reference.
PRODUCT FEATURES
Key Features of Inconel 601 Cold-Drawn Bar
Inconel 601 cold-drawn bar is supplied in UNS N06601, the nickel-chromium-iron alloy whose aluminium addition stabilizes oxide scale at extreme temperature. We provide ASTM B166 and ASME SB166 cold-drawn bar in stress-relieved and annealed cold-drawn conditions for furnace builders, heat-treatment shops and petrochemical plants. Every Inconel 601 cold-drawn bar order carries heat-number traceability, EN 10204 3.1 mill test reports and export documentation.
Inconel 601
Peak-Temperature Oxidation Resistance
For example, Inconel 601 cold-drawn bar holds a stable scale in clean air through continuous service.
01
Alumina Sub-Scale Formation
Specifically, the 1.0 to 1.7% aluminium in Inconel 601 cold-drawn bar builds an oxide layer that resists spalling.
02
Thermal Cycling Stability
Moreover, fixtures made from Inconel 601 cold-drawn bar survive repeated heating and cooling campaigns.
03
Carburizing Atmosphere Resistance
In addition, this Inconel 601 cold-drawn bar holds up inside carburizing and carbonitriding cycles.
04
Sulphur-Bearing Gas Capability
The high chromium level of Inconel 601 cold-drawn bar handles oxidizing sulphur atmospheres at temperature.
05
Strength Retained at Temperature
Inconel 601 cold-drawn bar keeps useful short-time strength to roughly 1000 °C.
06
Fabrication Friendly
We weld and form Inconel 601 cold-drawn bar readily in the annealed condition.
07
Full Traceability
Every Inconel 601 cold-drawn bar delivery carries heat numbers and EN 10204 3.1 documents.
08
WHY CHOOSE US
Why Choose Inconel 601
Sourcing Inconel 601 cold-drawn bar depends on a partner who reads furnace duty as carefully as chemistry. Southerly Alloy manages your Inconel 601 cold-drawn bar enquiry from duty review through export packing.
01
Duty-First Quoting
We record your peak temperature and atmosphere before proposing an Inconel 601 cold-drawn bar condition.
02
Documentation per Order
Specifically, certificates, PMI records and packing lists travel with each Inconel 601 cold-drawn bar delivery.
03
Cut-to-Order Range
In addition, we supply single trial pieces and container lots of Inconel 601 cold-drawn bar through one route.
04
Commitment in Writing
Quotations for Inconel 601 cold-drawn bar state condition, size and documents rather than vague availability.
MANUFACTURING PROCESS
Reliable Production For Critical Applications
From charge weighing to final release, Inconel 601 cold-drawn bar follows a controlled melting and finishing route. We document each Inconel 601 cold-drawn bar stage against its heat number.
01
Charge Weighing
We weigh Inconel 601 cold-drawn bar charge stock of nickel, chromium and iron, then target aluminium inside the 1.0 to 1.7% band.
02
Primary Melting
First, we melt and refine the Inconel 601 cold-drawn bar charge through AOD or VOD practice.
03
Electroslag Remelting
Next, ESR refines the Inconel 601 cold-drawn bar electrode where cleanliness demands it.
04
Casting
Then, we cast the refined Inconel 601 cold-drawn bar metal into ingots under controlled solidification.
05
Hot Working
After that, forging and rolling reduce the ingot to Inconel 601 cold-drawn bar section.
06
Solution Annealing
Subsequently, we anneal Inconel 601 cold-drawn bar between 1100 and 1200 °C and cool it fast.
07
Cold Finishing
Drawing, peeling or grinding then brings the Inconel 601 cold-drawn bar surface to the ordered finish.
08
Inspection and Release
Finally, we verify Inconel 601 cold-drawn bar chemistry, size and surface, then issue the certificate.
Manufacturing Facility
MANUFACTURING CAPABILITY
Advanced Production For Nickel Alloy Products
Southerly Alloy supplies Inconel 601 cold-drawn bar across the common ASTM B166 forms and conditions. We confirm Inconel 601 cold-drawn bar size, length, straightness and finish against your order before production. Moreover, cold-drawn bar sits inside our Inconel 601 bar and rod program.
20,000+ m²
Factory Area
Specifically, nickel alloy melting, annealing and inspection facilities for Inconel 601 cold-drawn bar under one roof.
50+
Production Machines
Equipment covering hot working, solution annealing and cold finishing for Inconel 601 cold-drawn bar.
600 Tons
Monthly Capacity
Inconel 601 cold-drawn bar output across stock and made-to-order sizes.
30+
Technical Engineers
Metallurgists who match the annealing condition of Inconel 601 cold-drawn bar to your furnace duty.
30+ Countries
Export Reach
In addition, documented logistics carry Inconel 601 cold-drawn bar worldwide.
QUALITY ASSURANCE
Strict Quality Control From Production To Delivery
Every Inconel 601 cold-drawn bar batch is inspected before release under our ISO 9001 system. In addition, we check Inconel 601 cold-drawn bar chemistry, mechanical properties, dimensions and surface against the ordered specification.
01
Grade Verification
We confirm Inconel 601 cold-drawn bar grade and heat against your purchase order.
02
Dimensional Inspection
Specifically, we check Inconel 601 cold-drawn bar size, length and straightness against standard and drawing tolerances.
03
Testing Arrangement
In addition, tensile, hardness and NDT tests run where your Inconel 601 cold-drawn bar specification requires.
04
Certificate Issue
Every Inconel 601 cold-drawn bar delivery includes EN 10204 3.1 documents keyed to heat numbers.
PRODUCT FORMS
Available Product Forms
Different conditions and variants of Inconel 601 cold-drawn bar suit different machining and service needs. Therefore, the list below shows the Inconel 601 Cold-Drawn Bar variants we quote most often.
02
Cold-Drawn Hex Bar
Cold-drawn Inconel 601 hex bar with tight across-flats control.
Request Availability →
03
Cold-Drawn Square Bar
Cold-drawn Inconel 601 square bar for machined fixture parts.
Request Availability →
04
Stress-Relieved Bar
Stress-relieved Inconel 601 bar where straightness must hold in service.
Request Availability →
05
Cold-Drawn Bright Bar
Cold-drawn Inconel 601 bright bar pairing finish with strength.
Request Availability →
06
Custom Cold-Drawn Bar
Custom Inconel 601 cold-drawn bar produced to your size and condition.
Request Availability →
APPLICATIONS
Engineered For Demanding Industries
Inconel 601 cold-drawn bar is chosen where hot furnace atmospheres decide component life. Specifically, the applications below show where Inconel 601 cold-drawn bar serves.
Discuss Your Application →
01
Precision Turned Parts
Inconel 601 cold-drawn bar feeds CNC turning of hot gas path components.
02
Fixture Pins
Cold-drawn bar makes pins holding alignment through furnace cycles.
03
Shaft Stock
Inconel 601 cold-drawn bar supplies shafts for hot corrosive media.
04
Fastener Stock
Cold-drawn bar gives fastener blanks added strength from cold work.
05
Straight-Critical Parts
Stress-relieved Inconel 601 bar holds straightness in long components.
06
Instrument Components
Cold-drawn bar machines into precise hot gas sensing hardware.
07
Valve Components
Inconel 601 cold-drawn bar serves stems and trim requiring close fits.
08
Custom Components
Cold-drawn bar supports bespoke Inconel 601 machining programs.
TECHNICAL INFORMATION
Technical Specifications
Detailed technical information including chemical composition, mechanical properties, standards and available dimensions.
Chemical Composition
ASTM B166 sets 58.0–63.0% nickel and 21.0–25.0% chromium for UNS N06601, and it orders this cold-drawn bar to an aluminium band of 1.0–1.7%. Above all, that aluminium level is what builds the protective oxide on this cold-drawn bar at temperature.
Indeed, the full composition table on the Inconel 601 material page lists every element against its ASTM B166 limit for this cold-drawn bar.
Mechanical Properties
The minimum room-temperature values below apply to UNS N06601 bar in the annealed and hot-finished conditions per ASTM B166. The applicable condition and section size govern final acceptance of Inconel 601 cold-drawn bar.
| Condition | Tensile Strength | Yield Strength, 0.2% Offset | Elongation |
|---|---|---|---|
| Annealed (cold-worked or hot-worked) | ≥95 ksi (655 MPa) | ≥35 ksi (240 MPa) | ≥30% |
| Hot-finished, as-worked | ≥85 ksi (585 MPa) | ≥35 ksi (240 MPa) | ≥15% |
- Some published datasheets quote 80 ksi (550 MPa) and 30 ksi (205 MPa) as the annealed minimum; the applicable ASTM B166 edition and the ordered condition decide final acceptance.
Physical Properties
Published references give this cold-drawn bar a density near 8.11 g/cm³, a melting range of 1360–1411 °C and an elastic modulus near 206 GPa. Moreover, the non-magnetic behaviour of this cold-drawn bar holds right through its working range.
In addition, the physical properties table on the Inconel 601 material page carries the electrical resistivity, the thermal expansion and the remaining design values behind this cold-drawn bar.
Heat Treatment
Inconel 601 cold-drawn bar is a solid-solution alloy, so annealing rather than aging sets its final softness. We supply the cold-drawn bar in the condition below that your furnace duty needs.
| Condition | Typical Treatment |
|---|---|
| Solution Annealed | Held between 1100 and 1200 °C (2010–2190 °F), then cooled rapidly |
| Stress Relieved | Available when straightness or residual stress demands it |
| Custom Condition | Heat treatment according to the agreed specification |
Standards
ASTM B166 is the principal UNS N06601 bar and rod document for this cold-drawn bar, issued by ASTM International. Moreover, ASME SB166 covers pressure equipment built from this cold-drawn bar and SAE AMS 5715 covers aerospace procurement.
| Standard | Product or Application |
|---|---|
| ASTM B166 | Nickel-chromium-iron alloy rod, bar and wire |
| ASME SB166 | ASME counterpart for pressure equipment |
| SAE AMS 5715 | Nickel alloy 601 bars, forgings and rings, annealed |
In short, the full standards list on the Inconel 601 material page adds the European designations and the remaining product documents for this cold-drawn bar.
Dimensions
Therefore, Inconel 601 cold-drawn bar dimensions depend on the manufacturing route, standard and order quantity. The table below lists typical supply ranges; please confirm your size in the inquiry.
| Product Form | Typical Supply | Length |
|---|---|---|
| Cold-Drawn Bar | 6–100 mm dia. | Cut to length |
| Cold-Drawn Round Bar | 6–100 mm dia. | Cut to length |
| Cold-Drawn Hex Bar | 10–80 mm A/F | Cut to length |
| Cold-Drawn Square Bar | 10–80 mm | Cut to length |
| Stress-Relieved Bar | 6–80 mm dia. | Cut to length |
| Cold-Drawn Bright Bar | 6–80 mm dia. | Cut to length |
| Custom Cold-Drawn Bar | To drawing | Custom |
Available cold-drawn bar dimensions depend on the manufacturing route, standard, material condition and order quantity. Please confirm your required cold-drawn bar size, section and length in the inquiry.
Surface Finishes
Therefore, the surface condition decides how this cold-drawn bar machines, welds and sheds scale in service. Specifically, we agree the finish on this Inconel 601 cold-drawn bar with your order.
| Surface Condition | Typical Use |
|---|---|
| Cold Drawn | Close diameter control on this cold-drawn bar with a bright surface. |
| Solution Annealed | The condition set for high-temperature duty on this cold-drawn bar. |
| Polished | Reduced roughness on this cold-drawn bar for visible or handled components. |
Meanwhile, the surface finishes table on the Inconel 601 material page lists the remaining conditions we quote for this cold-drawn bar.
Related forms from the same heat cover Inconel 601 Flat Bar, Inconel 601 Forged Bar and Inconel 601 Hex Bar when your cold-drawn bar order needs them.
TECHNICAL DOCUMENTATION
Download Technical Datasheet
Get detailed information including specifications, standards, dimensions and material properties.
HOW TO START
Start Your Order in 6 Simple Steps
One coordinator keeps your Inconel 601 cold-drawn bar order moving from enquiry to shipment. Therefore, most Inconel 601 cold-drawn bar orders move from quotation to delivery inside three weeks.
1
Send Your Enquiry
Send the Inconel 601 cold-drawn bar size, quantity, standard and duty temperature.
2
Confirm the Specification
State the ASTM B166 condition and finish your Inconel 601 cold-drawn bar parts require.
3
Review the Quotation
Receive Inconel 601 cold-drawn bar pricing by dimension, quantity and destination.
4
Approve the Order
Approve the Inconel 601 cold-drawn bar specification, terms and schedule in writing.
5
Production and Inspection
We produce and inspect your Inconel 601 cold-drawn bar to the agreed route.
6
Shipment and Papers
Receive Inconel 601 cold-drawn bar with the mill certificate and export documentation.
CERTIFICATIONS & QUALITY DOCUMENTATION
Certifications & Quality Documentation
Our production and inspection processes are certified to international standards, and every delivery ships with EN 10204 3.1 mill test certificates.
ISO 9001:2015
Quality Management System
PED 2014/68/EU
Pressure Equipment Directive
ASTM / ASME
Material Standards Compliance
EN 10204 3.1
Mill Test Certificates
FAQ
Frequently Asked Questions
Which standards apply to Inconel 601 Cold-Drawn Bar?
ASTM B166 and ASME SB166 govern Inconel 601 cold-drawn bar, while SAE AMS 5715 serves aerospace bar procurement.
How hot can Inconel 601 cold-drawn bar run in service?
Inconel 601 cold-drawn bar reaches about 1250 °C in continuous clean-air service, set by atmosphere, load and cycle rate.
What heat treatment does Inconel 601 cold-drawn bar need?
Solution annealing between 1100 and 1200 °C sets the softness of Inconel 601 cold-drawn bar, and no aging step applies.
Can Inconel 601 cold-drawn bar be welded?
Yes. We weld Inconel 601 cold-drawn bar in the annealed condition with matching ERNiCrFe-11 filler.
How is the price of Inconel 601 cold-drawn bar calculated?
Pricing follows weight for Inconel 601 cold-drawn bar, with the prevailing nickel and chromium surcharge applied.
What is your MOQ for Inconel 601 cold-drawn bar?
A single piece covers many common Inconel 601 cold-drawn bar sizes.
What are your trade terms for Inconel 601 cold-drawn bar?
FOB covers most Inconel 601 cold-drawn bar orders, and EXW, CFR or CIF terms are available on request.
What is the lead time for Inconel 601 cold-drawn bar?
Stock Inconel 601 cold-drawn bar sizes ship in 7 to 15 days, while made-to-order lengths take longer.
Do you provide EN 10204 3.1 or 3.2 certificates for Inconel 601 cold-drawn bar?
Yes. Every Inconel 601 cold-drawn bar heat ships with 3.1, and 3.2 endorsement is booked through the order.
What information should an Inconel 601 cold-drawn bar enquiry include?
Please send diameter, condition, finish, quantity and destination so we can quote Inconel 601 cold-drawn bar accurately.
REQUEST FOR QUOTATION
Need A Custom Alloy Solution?
Inconel 601 cold-drawn bar from Southerly Alloy covers standard and custom supply to ASTM B166. Send your Inconel 601 cold-drawn bar size, quantity, condition and destination to receive a quotation.
Specifically, we review your Inconel 601 cold-drawn bar specification, confirm the annealing route, and return pricing with clear terms. Production follows the approved Inconel 601 cold-drawn bar specification, and each delivery ships with complete documentation.
