01
ERNiCrFe-11 Bare Wire
AWS A5.14 solid Inconel 601 welding wire for GTAW and conditional GMAW.
Request Availability →Inconel 601 Welding Wire
ERNiCrFe-11 bare wire and ENiCrFe-11 electrodes matching Inconel 601 base metal for GTAW, GMAW and SMAW above 1150 °C service.
Heat-Level Traceability
Every Inconel 601 welding wire order is keyed to its melting heat number on the EN 10204 3.1 certificate.
Condition Matched to Duty
Specifically, we set the annealed or hot-finished state of your Inconel 601 welding wire against the service temperature you declare.
Export Papers in One Set
Moreover, Inconel 601 welding wire ships with packing list, mill certificate and export documents together.
PRODUCT OVERVIEW
About Inconel 601 Welding Wire
Inconel 601 welding wire covers the filler metals classified for joining UNS N06601 base metal. The bare product runs as ERNiCrFe-11 per AWS A5.14, and the covered electrode runs as ENiCrFe-11 per AWS A5.11.
We stock Inconel 601 welding wire as straight TIG rods, wound MIG spools and sealed electrode packs. Aluminium carried by the filler keeps the deposit oxidation-resistant, matching the base metal above 1150 °C service.
Meanwhile, the base-metal chemistry that Inconel 601 welding wire joins against is set out on our Inconel 601 material page for weld procedure work.
PRODUCT FEATURES
Key Features of Inconel 601 Welding Wire
Inconel 601 welding wire is supplied in UNS N06601, the nickel-chromium-iron alloy whose aluminium addition stabilizes oxide scale at extreme temperature. We provide ASTM B166 and ASME SB166 welding wire as ERNiCrFe-11 bare wire, TIG rods and MIG spools for furnace builders, heat-treatment shops and petrochemical plants. Every Inconel 601 welding wire order carries heat-number traceability, EN 10204 3.1 mill test reports and export documentation.
Inconel 601
Matching Aluminium Transfer
Specifically, ERNiCrFe-11 carries the aluminium that keeps Inconel 601 welding wire weld deposits oxidation-resistant.
01
High-Temperature GTAW Choice
For example, ERNiCrFe-11 is the recommended Inconel 601 welding wire above 1150 °C service.
02
Sulphur Atmosphere Welds
Moreover, the Inconel 601 welding wire deposit resists hydrogen sulphide and sulphur dioxide exposure.
03
Dissimilar Joint Capability
In addition, Inconel 601 welding wire joins the alloy to carbon and stainless steels.
04
Ductility-Dip Control
Boron and zirconium in the Inconel 601 welding wire deposit limit ductility-dip cracking tendency.
05
Procedure-Qualified Supply
We support Inconel 601 welding wire orders with ASME Section IX F-No. 43 classification data.
06
Clean Packing
Sealed packing keeps the Inconel 601 welding wire surface weld-ready until use.
07
WHY CHOOSE US
Why Choose Inconel 601
Sourcing Inconel 601 welding wire depends on a partner who reads furnace duty as carefully as chemistry. Southerly Alloy manages your Inconel 601 welding wire enquiry from duty review through export packing.
01
Duty-First Quoting
We record your peak temperature and atmosphere before proposing an Inconel 601 welding wire condition.
02
Documentation per Order
Specifically, certificates, PMI records and packing lists travel with each Inconel 601 welding wire delivery.
03
Cut-to-Order Range
In addition, we supply single trial pieces and container lots of Inconel 601 welding wire through one route.
04
Commitment in Writing
Quotations for Inconel 601 welding wire state condition, size and documents rather than vague availability.
MANUFACTURING PROCESS
Reliable Production For Critical Applications
From charge weighing to final weld test, Inconel 601 welding wire follows a controlled filler-metal route. We document each Inconel 601 welding wire stage against its heat number.
01
Filler Charge Weighing
We weigh nickel, chromium and iron, then target aluminium for the ERNiCrFe-11 window.
02
Melting and Casting
First, we melt and cast the Inconel 601 welding wire electrode stock under controlled practice.
03
Hot Rolling and Drawing
Next, rolling and drawing reduce the stock to Inconel 601 welding wire wire sizes.
04
Surface Cleaning
Then, we descale and clean the Inconel 601 welding wire wire to a weld-ready bright surface.
05
Spooling and Cutting
After that, we wind MIG spools and cut straight Inconel 601 welding wire TIG rods.
06
Electrode Coating
For ENiCrFe-11, we extrude the basic covering onto the Inconel 601 welding wire core wire.
07
Baking and Packing
Subsequently, we bake Inconel 601 welding wire electrodes and seal them against moisture pickup.
08
Weld-Test and Release
Finally, we run all-weld-metal checks on Inconel 601 welding wire and issue the certificate.
Manufacturing Facility
MANUFACTURING CAPABILITY
Advanced Production For Nickel Alloy Products
Southerly Alloy supplies Inconel 601 welding wire across the common ASTM B166 forms and conditions. We confirm Inconel 601 welding wire size, length, straightness and finish against your order before production. Moreover, welding wire sits inside our Inconel 601 bar and rod program.
20,000+ m²
Factory Area
Specifically, nickel alloy melting, annealing and inspection facilities for Inconel 601 welding wire under one roof.
50+
Production Machines
Equipment covering hot working, solution annealing and cold finishing for Inconel 601 welding wire.
600 Tons
Monthly Capacity
Inconel 601 welding wire output across stock and made-to-order sizes.
30+
Technical Engineers
Metallurgists who match the annealing condition of Inconel 601 welding wire to your furnace duty.
30+ Countries
Export Reach
In addition, documented logistics carry Inconel 601 welding wire worldwide.
QUALITY ASSURANCE
Strict Quality Control From Production To Delivery
Every Inconel 601 welding wire batch is inspected before release under our ISO 9001 system. In addition, we check Inconel 601 welding wire chemistry, mechanical properties, dimensions and surface against the ordered specification.
01
Grade Verification
We confirm Inconel 601 welding wire grade and heat against your purchase order.
02
Dimensional Inspection
Specifically, we check Inconel 601 welding wire size, length and straightness against standard and drawing tolerances.
03
Testing Arrangement
In addition, tensile, hardness and NDT tests run where your Inconel 601 welding wire specification requires.
04
Certificate Issue
Every Inconel 601 welding wire delivery includes EN 10204 3.1 documents keyed to heat numbers.
PRODUCT FORMS
Available Product Forms
Different conditions and variants of Inconel 601 welding wire suit different machining and service needs. Therefore, the list below shows the Inconel 601 Welding Wire variants we quote most often.
02
TIG Filler Rods
Straight ERNiCrFe-11 Inconel 601 welding wire in 1000 mm lengths.
Request Availability →
03
MIG Spools
ERNiCrFe-11 wire wound on spools for GMAW where conditions allow.
Request Availability →
04
ENiCrFe-11 Electrodes
AWS A5.11 covered electrodes carrying the matching aluminium addition.
Request Availability →
05
Straight Cut Wire
Inconel 601 welding wire cut to length for precision TIG work.
Request Availability →
06
Custom Winding
Inconel 601 welding wire wound to your spool size, weight and length spec.
Request Availability →
APPLICATIONS
Engineered For Demanding Industries
Inconel 601 welding wire is chosen where joints must match base-metal oxidation life at temperature. Specifically, the applications below show where Inconel 601 welding wire serves.
Discuss Your Application →
01
Joining Inconel 601 Itself
ERNiCrFe-11 Inconel 601 welding wire joins base metal of the same grade.
02
Above 1150 °C Service
GTAW with Inconel 601 welding wire is the recommended route above 1150 °C.
03
Sulphur-Bearing Atmospheres
The deposit resists hydrogen sulphide and sulphur dioxide exposure.
04
Furnace Fixture Fabrication
Inconel 601 welding wire builds baskets, trays and fixture frames.
05
Radiant Tube Repair
Welding wire restores radiant tubes without losing scale stability.
06
Dissimilar Metal Joints
Inconel 601 welding wire joins the alloy to carbon and stainless steels.
07
Petrochemical Heaters
The filler joins reformer and heater hardware running at temperature.
08
Custom Weldments
Filler metal supports bespoke Inconel 601 fabrication projects.
TECHNICAL INFORMATION
Technical Specifications
Detailed technical information including chemical composition, mechanical properties, standards and available dimensions.
Chemical Composition
ASTM B166 sets 58.0–63.0% nickel and 21.0–25.0% chromium for UNS N06601, and it orders this welding wire to an aluminium band of 1.0–1.7%. Above all, that aluminium level is what builds the protective oxide on this welding wire at temperature.
Indeed, the full composition table on the Inconel 601 material page lists every element against its ASTM B166 limit for this welding wire.
Mechanical Properties
The all-weld-metal values below summarize published ERNiCrFe-11 classification data for Inconel 601 welding wire. Note that AWS does not publish yield strength for these filler metals.
| Product (all-weld metal) | Tensile Strength | Yield Strength | Elongation |
|---|---|---|---|
| ERNiCrFe-11 bare wire (AWS A5.14) | ≥94 ksi (648 MPa) | Not classified by AWS | ≥40% |
| ENiCrFe-11 electrode (AWS A5.11) | ≥94 ksi (648 MPa) | Not classified by AWS | ≥40% |
- Published all-weld-metal data for ERNiCrFe-11 report about 94,000 psi (648 MPa) tensile with roughly 40% elongation; your weld procedure qualification governs acceptance.
Physical Properties
Published references give this welding wire a density near 8.11 g/cm³, a melting range of 1360–1411 °C and an elastic modulus near 206 GPa. Moreover, the non-magnetic behaviour of this welding wire holds right through its working range.
In addition, the physical properties table on the Inconel 601 material page carries the electrical resistivity, the thermal expansion and the remaining design values behind this welding wire.
Filler Metal Classifications
Specifically, the two Inconel 601 welding products below carry the same matching aluminium addition in different forms.
| Product | AWS Class | Key Composition | Typical Strength | Best Suited For |
|---|---|---|---|---|
| Bare wire | ERNiCrFe-11 (A5.14) / S Ni6601 | Ni 58.0 min%, Cr 21.0–25.0%, Al 1.0–1.7% | ≥94 ksi (648 MPa) | GTAW primary, GMAW conditional |
| Covered electrode | ENiCrFe-11 (A5.11) | Same core wire with basic covering | ≥94 ksi (648 MPa) | SMAW field repair and fabrication |
Standards
AWS A5.14 is the principal ERNiCrFe-11 classification for this welding wire, issued by the American Welding Society. Moreover, AWS A5.11 covers the ENiCrFe-11 electrode that pairs with this welding wire.
| Standard | Product or Application |
|---|---|
| AWS A5.14 | ERNiCrFe-11 bare nickel-chromium-iron welding wire |
| AWS A5.11 | ENiCrFe-11 covered welding electrode |
| ASME SFA-5.14 | ASME version of the bare filler specification |
In short, the full standards list on the Inconel 601 material page adds the European designations and the remaining product documents for this welding wire.
Dimensions
Therefore, Inconel 601 welding wire dimensions depend on the manufacturing route, standard and order quantity. The table below lists typical supply ranges; please confirm your size in the inquiry.
| Product Form | Typical Supply | Length |
|---|---|---|
| TIG Filler Rod (GTAW) | 1.6 / 2.4 / 3.2 mm × 1000 mm | 5 kg tube |
| MIG Wire (GMAW) | 0.9 / 1.14 mm | Spool |
| Straight Cut Wire | 0.8–3.2 mm dia. | Straight lengths |
| Covered Electrode (SMAW) | 2.4 / 3.2 mm | Sealed pack |
| Custom Winding | To drawing | Custom |
Available welding wire dimensions depend on the manufacturing route, standard, material condition and order quantity. Please confirm your required welding wire size, section and length in the inquiry.
Surface Finishes
Therefore, the surface condition decides how this welding wire machines, welds and sheds scale in service. Specifically, we agree the finish on this Inconel 601 welding wire with your order.
| Surface Condition | Typical Use |
|---|---|
| Clean Bright | The standard finish for bare ERNiCrFe-11 welding wire, with no copper coating. |
| Spool Wound | Layer-wound welding wire for smooth GMAW feeding where conditions allow. |
| Straight Rods | Cut TIG rods of this welding wire with clean, deburred ends. |
Meanwhile, the surface finishes table on the Inconel 601 material page lists the remaining conditions we quote for this welding wire.
Related forms from the same heat cover Inconel 601 Wire, Inconel 601 Bright Bar and Inconel 601 Centreless-Ground Rod when your welding wire order needs them.
TECHNICAL DOCUMENTATION
Download Technical Datasheet
Get detailed information including specifications, standards, dimensions and material properties.
HOW TO START
Start Your Order in 6 Simple Steps
One coordinator keeps your Inconel 601 welding wire order moving from enquiry to shipment. Therefore, most Inconel 601 welding wire orders move from quotation to delivery inside three weeks.
1
Send Your Enquiry
Send the Inconel 601 welding wire size, quantity, standard and duty temperature.
2
Confirm the Specification
State the ASTM B166 condition and finish your Inconel 601 welding wire parts require.
3
Review the Quotation
Receive Inconel 601 welding wire pricing by dimension, quantity and destination.
4
Approve the Order
Approve the Inconel 601 welding wire specification, terms and schedule in writing.
5
Production and Inspection
We produce and inspect your Inconel 601 welding wire to the agreed route.
6
Shipment and Papers
Receive Inconel 601 welding wire with the mill certificate and export documentation.
CERTIFICATIONS & QUALITY DOCUMENTATION
Certifications & Quality Documentation
Our production and inspection processes are certified to international standards, and every delivery ships with EN 10204 3.1 mill test certificates.
ISO 9001:2015
Quality Management System
PED 2014/68/EU
Pressure Equipment Directive
ASTM / ASME
Material Standards Compliance
EN 10204 3.1
Mill Test Certificates
FAQ
Frequently Asked Questions
Which AWS classification applies to Inconel 601 Welding Wire?
ERNiCrFe-11 per AWS A5.14 covers the bare Inconel 601 welding wire, and ENiCrFe-11 per AWS A5.11 covers the electrode.
Is the electrode chemistry the same as the bare wire?
Yes. ENiCrFe-11 carries the same Inconel 601 welding wire core chemistry as the bare wire, with a basic covering for SMAW.
When is GTAW the only recommended process for Inconel 601 welding wire?
Above 1150 °C service, GTAW with Inconel 601 welding wire is the recommended joining route; GMAW serves lower-temperature work.
Can Inconel 601 welding wire weld dissimilar metals?
Yes. Inconel 601 welding wire joins the alloy to carbon and stainless steels in furnace and heater fabrications.
How is the price of Inconel 601 welding wire calculated?
Pricing follows weight for Inconel 601 welding wire, with the prevailing nickel surcharge applied at quotation.
What is your MOQ for Inconel 601 welding wire?
One spool or tube covers many common Inconel 601 welding wire diameters.
What are your trade terms for Inconel 601 welding wire?
FOB covers most Inconel 601 welding wire orders, and EXW or CIF terms are available on request.
What is the lead time for Inconel 601 welding wire?
Stock Inconel 601 welding wire sizes ship in 7 to 15 days, while custom winding takes longer.
Do you provide EN 10204 3.1 or 3.2 certificates for Inconel 601 welding wire?
Yes. Every Inconel 601 welding wire batch ships with 3.1, and 3.2 endorsement is booked through the order.
What information should an Inconel 601 welding wire enquiry include?
Please send diameter, AWS class, spool weight, quantity and destination so we can quote Inconel 601 welding wire accurately.
REQUEST FOR QUOTATION
Need A Custom Alloy Solution?
Inconel 601 welding wire from Southerly Alloy covers standard and custom supply to ASTM B166. Send your Inconel 601 welding wire size, quantity, condition and destination to receive a quotation.
Specifically, we review your Inconel 601 welding wire specification, confirm the annealing route, and return pricing with clear terms. Production follows the approved Inconel 601 welding wire specification, and each delivery ships with complete documentation.
