01
Custom Hex Profile
Custom hex profiles beyond standard catalogue sizes.
Request Availability →Inconel 625 Special-Profile Bar
Solid-solution nickel-chromium-molybdenum special-profile bar for marine, aerospace, chemical and oil and gas service.
Mill-Certified Material
Inconel 625 special-profile bar carries full heat-number traceability on every order.
Custom Bar Supply
Specifically, we cut Inconel 625 special-profile bar to your diameters, lengths and surface finishes.
Fast Global Delivery
Therefore, our team ships Inconel 625 special-profile bar worldwide with complete export papers.
PRODUCT OVERVIEW
About Inconel 625 Special-Profile Bar
Inconel 625 special-profile bar is a solid-solution-strengthened nickel-chromium-molybdenum alloy. Inconel 625 special-profile bar keeps high strength in seawater, hot acids and high-temperature gas paths.
We supply Inconel 625 special-profile bar as hot-worked, cold-drawn, peeled or centerless-ground stock to ASTM B446. Every Inconel 625 special-profile bar order carries heat-number traceability and EN 10204 3.1 documents for incoming inspection.
In addition, Inconel 625 special-profile bar shares the UNS N06625 chemistry detailed on our Inconel 625 material page for alloy data.
PRODUCT FEATURES
Key Features of Inconel 625 Special-Profile Bar
Inconel 625 special-profile bar is a solid-solution nickel-chromium-molybdenum alloy supplied to ASTM B446 and ASME SB446. We provide UNS N06625 special-profile bar, bright, cold-drawn, peeled and centerless-ground stock for marine, aerospace, chemical, oil and gas and power service. Every order carries heat-number traceability and EN 10204 3.1 mill test reports.
Inconel 625
Outstanding Pitting Resistance
For example, Inconel 625 special-profile bar resists localized attack in seawater, chlorides and oxidizing acids.
01
High-Temperature Strength
Solid-solution hardening gives Special-Profile Bar very high strength without aging.
02
Wide Service Range
In addition, Special-Profile Bar keeps dependable properties from cryogenic to about 980 °C.
03
Excellent Weldability
We weld Inconel 625 special-profile bar without preheat and usually without post-weld heat treatment.
04
Fatigue Resistance
Moreover, Special-Profile Bar suits cyclic loading and repeated thermal cycling in service.
05
Good Machinability
Inconel 625 special-profile bar machines well in the annealed condition with carbide tooling.
06
Full Traceability
Specifically, every special-profile bar order carries heat numbers and EN 10204 3.1 documents.
07
Custom Supply
We cut Inconel 625 special-profile bar to your diameter, length, finish and packing.
08
WHY CHOOSE US
Why Choose Inconel 625
Inconel 625 special-profile bar needs a supply partner who controls specification, quality and delivery. Southerly Alloy manages your Inconel 625 special-profile bar order from review to shipment with traceable material.
01
Specification Compliance
We match Inconel 625 special-profile bar to your ASTM B446 condition, diameter and finish.
02
Quality and Traceability
Specifically, every special-profile bar batch ships with EN 10204 3.1 certificates and heat numbers.
03
Flexible Supply
In addition, we cut Inconel 625 special-profile bar to custom diameters, lengths and packing.
04
Responsive Service
As a result, our team confirms special-profile bar specifications quickly and ships with full export papers.
MANUFACTURING PROCESS
Reliable Production For Critical Applications
From melting to final check, we process Inconel 625 special-profile bar to your ordered ASTM B446 condition. We control and document each Inconel 625 special-profile bar stage with full heat-number traceability.
01
Raw Material Selection
We weigh nickel, chromium, molybdenum and niobium to make Inconel 625 special-profile bar meet UNS N06625 chemistry.
02
Vacuum Induction Melting
First, we melt the Inconel 625 special-profile bar charge under vacuum to limit gas pickup.
03
Electroslag Remelting
Next, ESR refines the electrode for Inconel 625 special-profile bar to cut inclusions where specified.
04
Hot Forging and Rolling
Then, we forge and hot roll the ingot into Inconel 625 special-profile bar with controlled working.
05
Solution Annealing
After that, we anneal Inconel 625 special-profile bar to develop the strength and corrosion resistance ordered.
06
Cold Working and Finishing
Subsequently, cold drawing, peeling or grinding brings Inconel 625 special-profile bar to tighter size and finish.
07
Dimensional and Surface Checks
We verify Inconel 625 special-profile bar diameter, straightness and surface before release.
08
Final Inspection and MTR
Finally, we confirm Inconel 625 special-profile bar chemistry and properties, then issue the MTR.
Manufacturing Facility
MANUFACTURING CAPABILITY
Advanced Production For Nickel Alloy Products
Specifically, Southerly Alloy supplies Inconel 625 special-profile bar across the common ASTM B446 forms and conditions. We confirm special-profile bar diameter, length, straightness and finish against your order. Moreover, special-profile bar is one section in our Inconel 625 bar and rod program.
20,000+ m²
Factory Area
Specifically, modern production facilities for Inconel 625 special-profile bar and dedicated workshops.
50+
Production Machines
Advanced equipment for Inconel 625 special-profile bar manufacturing.
600 Tons
Monthly Capacity
Inconel 625 special-profile bar output across standard and custom sizes.
30+
Technical Engineers
Experienced engineers for Inconel 625 special-profile bar specification support.
30+ Countries
Export Reach
In addition, reliable logistics for Inconel 625 special-profile bar with full documentation.
QUALITY ASSURANCE
Strict Quality Control From Production To Delivery
Every Inconel 625 special-profile bar batch passes inspection before release. In addition, we check Inconel 625 special-profile bar chemistry, mechanical properties, dimensions and surface under our ISO 9001 system.
01
Material Verification
We confirm Inconel 625 special-profile bar grade and heat against your purchase order.
02
Dimensional Inspection
Specifically, we measure special-profile bar diameter, length and straightness to standard and drawing.
03
Testing and Inspection
In addition, we arrange tensile, impact and NDT tests where your Inconel 625 special-profile bar specification requires.
04
Certification and Traceability
Every special-profile bar delivery includes EN 10204 3.1 certificates with heat numbers.
PRODUCT FORMS
Available Product Forms
Inconel 625 special-profile bar comes in several conditions and variants for different machining and service needs. Specifically, the list below shows the common Special-Profile Bar forms we supply.
02
Custom Square Profile
Custom square profiles made to your specification.
Request Availability →
03
Flat-and-Edge Profile
Flat bar with special edge geometry for fabrication.
Request Availability →
04
T-Slot Profile Bar
Bar with machined T-slot geometry for fixtures.
Request Availability →
05
Stepped Profile Bar
Bar with stepped diameters or sections for assemblies.
Request Availability →
06
Forged Special Profile
Forged special shapes for heavy service.
Request Availability →
07
Machined Profile Bar
Fully machined special profiles to drawing.
Request Availability →
APPLICATIONS
Engineered For Demanding Industries
Buyers specify Inconel 625 special-profile bar wherever parts face seawater, chemicals or high heat with mechanical load. Specifically, the applications below show typical Special-Profile Bar uses.
Discuss Your Application →
01
Custom Machinery
Inconel 625 special-profile bar builds proprietary equipment parts.
02
Aerospace Parts
Special-profile bar forms airframe and fixture components.
03
Oil and Gas Tools
Special-profile bar builds tool components for downhole service.
04
Marine Service
Special-profile bar serves seawater-exposed assemblies.
05
Chemical Internals
Special-profile bar forms reactor internals and mounts.
06
Power Attachments
Special-profile bar supports turbine attachments.
07
Custom Fittings
Special-profile bar machines into bespoke fittings.
08
Precision Components
Fully machined special profiles meet tight drawings.
TECHNICAL INFORMATION
Technical Specifications
Detailed technical information including chemical composition, mechanical properties, standards and available dimensions.
Chemical Composition
ASTM B446 holds UNS N06625 inside 20.0–23.0% chromium, 8.0–10.0% molybdenum and 3.15–4.15% niobium plus tantalum, and this special-profile bar is quoted to that same window. Consequently, those three additions are what hold this special-profile bar against chlorides and hot acids.
Specifically, the full composition table on the Inconel 625 material page lists every element against its ASTM B446 limit for this special-profile bar.
Mechanical Properties
ASTM B446 furnishes UNS N06625 rod and bar in two heat-treated grades. Grade 1 (annealed) normally serves up to about 593 °C with higher minimum strength. Grade 2 (solution annealed) normally serves above about 593 °C where creep and rupture resistance matter. Specifically, minimum room-temperature properties appear below; Grade 1 values vary with size.
| Grade / Condition | Product Size | Tensile Strength | Yield Strength, 0.2% Offset | Elongation |
|---|---|---|---|---|
| Grade 1 — Annealed (≥871 °C / 1600 °F) | Up to 101.6 mm (4 in.) dia. | ≥120 ksi (827 MPa) | ≥60 ksi (414 MPa) | ≥30% |
| Grade 1 — Annealed (≥871 °C / 1600 °F) | Over 101.6 to 254 mm (4–10 in.) dia. | ≥110 ksi (758 MPa) | ≥50 ksi (345 MPa) | ≥25% |
| Grade 2 — Solution annealed (≥1093 °C / 2000 °F) | All sizes | ≥100 ksi (690 MPa) | ≥40 ksi (276 MPa) | ≥30% |
- ASTM B446 anneals Grade 1 at 871 °C (1600 °F) minimum. The standard solution anneals Grade 2 at 1093 °C (2000 °F) minimum, with or without a stabilization anneal at 982 °C (1800 °F) minimum to improve sensitization resistance. The applicable ASTM B446 grade, size and condition govern final acceptance.
Physical Properties
Published references place the density of this special-profile bar near 8.44 g/cm³, with a melting range of 1290–1350 °C. Moreover, those values describe the annealed condition that this special-profile bar normally ships in.
In addition, the physical properties table on the Inconel 625 material page carries the modulus, the thermal expansion and the remaining design values behind this special-profile bar.
Standards
ASTM B446 is the principal UNS N06625 bar and rod document for this special-profile bar, issued by ASTM International. Moreover, ASME SB446 covers pressure equipment built from this special-profile bar and SAE AMS 5666 covers aerospace procurement.
| Standard | Product or Application |
|---|---|
| ASTM B446 | Nickel-chromium-molybdenum-niobium alloy bar and rod |
| ASME SB446 | ASME counterpart for bar and rod |
| SAE AMS 5666 | Nickel alloy 625 bar, forgings and rings, annealed |
Finally, the full standards list on the Inconel 625 material page adds the European designations and the remaining product documents for this special-profile bar.
Dimensions
Therefore, Inconel 625 special-profile bar dimensions depend on the manufacturing route, standard and order quantity. The table below lists typical supply ranges; please confirm your size in the inquiry.
| Product Form | Typical Supply | Length |
|---|---|---|
| Special-Profile Bar | To customer drawing | Custom |
| Custom Hex Profile | To drawing | Custom |
| Custom Square Profile | To drawing | Custom |
| Flat-and-Edge Profile | To drawing | Custom |
| T-Slot Profile Bar | To drawing | Custom |
| Stepped Profile Bar | To drawing | Custom |
| Forged Special Profile | To drawing | Custom |
| Machined Profile Bar | To drawing | Custom |
Available special-profile bar dimensions depend on the manufacturing route, standard, material condition and order quantity. Please confirm your required special-profile bar diameter, section and length in the inquiry.
Surface Finishes
Therefore, the surface condition decides how this special-profile bar machines and how well it holds up in chloride service. Specifically, we agree the finish on this Inconel 625 special-profile bar with your order.
| Surface Condition | Typical Use |
|---|---|
| Cold Drawn | Close tolerance on this special-profile bar with a smoother drawn skin. |
| Peeled | A machined skin on this special-profile bar with controlled diameter. |
| Polished | Low roughness on this special-profile bar for product-contact surfaces. |
Meanwhile, the surface finishes table on the Inconel 625 material page lists the remaining conditions we quote for this special-profile bar.
Related forms from the same heat cover Inconel 625 Square Bar, Inconel 625 Flat Bar and Inconel 625 Hex Bar when your special-profile bar order needs them.
TECHNICAL DOCUMENTATION
Download Technical Datasheet
Get detailed information including specifications, standards, dimensions and material properties.
HOW TO START
Start Your Order in 6 Simple Steps
From first inquiry to delivered Inconel 625 special-profile bar, our process keeps you informed at every stage. Therefore, most Inconel 625 special-profile bar orders move from inquiry to shipment in under three weeks.
1
Send Your Inquiry
Send your Inconel 625 special-profile bar grade, diameter, length, quantity and standard.
2
Confirm the Specification
State ASTM B446 with the Inconel 625 special-profile bar condition and finish you need.
3
Review the Quotation
Receive pricing for Inconel 625 special-profile bar by dimension, quantity and destination.
4
Confirm the Order
Approve the Inconel 625 special-profile bar technical spec, terms and schedule.
5
Production and Inspection
We make and inspect your Inconel 625 special-profile bar to the agreed specification.
6
Shipment and Documentation
Receive Inconel 625 special-profile bar with EN 10204 3.1 MTC and export papers.
CERTIFICATIONS & QUALITY DOCUMENTATION
Certifications & Quality Documentation
Our production and inspection processes are certified to international standards, and every delivery ships with EN 10204 3.1 mill test certificates.
ISO 9001:2015
Quality Management System
PED 2014/68/EU
Pressure Equipment Directive
ASTM / ASME
Material Standards Compliance
EN 10204 3.1
Mill Test Certificates
FAQ
Frequently Asked Questions
Which ASTM specification applies to Inconel 625 Special-Profile Bar?
ASTM B446 and ASME SB446 cover Inconel 625 special-profile bar; SAE AMS 5666 for aerospace.
How is the price of Inconel 625 special-profile bar calculated?
Mainly by weight for Inconel 625 special-profile bar with the prevailing nickel surcharge.
Can Inconel 625 special-profile bar be welded?
Yes. We weld Inconel 625 special-profile bar without preheat and usually without post-weld heat treatment.
Is Inconel 625 special-profile bar hard to machine?
No. Inconel 625 special-profile bar machines in the annealed condition with carbide tooling and rigid setups.
Can Inconel 625 special-profile bar resist seawater attack?
Yes. Inconel 625 special-profile bar resists pitting, crevice corrosion and chloride stress-corrosion cracking.
What applications use Inconel 625 special-profile bar?
Inconel 625 special-profile bar serves marine shafts, aerospace parts, chemical components and oil and gas equipment.
What is your MOQ for Inconel 625 special-profile bar?
One piece for many common Inconel 625 special-profile bar sizes.
What are your trade terms for Inconel 625 special-profile bar?
Mainly FOB for Inconel 625 special-profile bar; EXW and CIF also available.
What is the lead time for Inconel 625 special-profile bar?
Stock Inconel 625 special-profile bar sizes ship in 7-15 days. Custom sizes take a little longer.
Do you provide EN 10204 3.1 or 3.2 certificates for Inconel 625 special-profile bar?
Yes. Every Inconel 625 special-profile bar delivery includes 3.1; 3.2 with third-party endorsement on request.
REQUEST FOR QUOTATION
Need A Custom Alloy Solution?
Inconel 625 special-profile bar from Southerly Alloy covers standard and custom sizes to ASTM B446. Send your Inconel 625 special-profile bar grade, dimensions, quantity and delivery needs to receive a quotation.
Specifically, our team reviews your Inconel 625 special-profile bar specification, confirms the condition and finish, and returns pricing with clear Incoterms. We then produce and inspect your special-profile bar before shipping it with full export documentation.
