01
Cold-Drawn Square Bar
Cold-drawn square bar with tighter across-flats tolerances.
Request Availability →Inconel 625 Square Bar
Solid-solution nickel-chromium-molybdenum square bar for marine, aerospace, chemical and oil and gas service.
Mill-Certified Material
Inconel 625 square bar carries full heat-number traceability on every order.
Custom Bar Supply
Specifically, we cut Inconel 625 square bar to your diameters, lengths and surface finishes.
Fast Global Delivery
Therefore, our team ships Inconel 625 square bar worldwide with complete export papers.
PRODUCT OVERVIEW
About Inconel 625 Square Bar
Inconel 625 square bar is a solid-solution-strengthened nickel-chromium-molybdenum alloy. Inconel 625 square bar keeps high strength in seawater, hot acids and high-temperature gas paths.
We supply Inconel 625 square bar as hot-worked, cold-drawn, peeled or centerless-ground stock to ASTM B446. Every Inconel 625 square bar order carries heat-number traceability and EN 10204 3.1 documents for incoming inspection.
In addition, Inconel 625 square bar shares the UNS N06625 chemistry detailed on our Inconel 625 material page for alloy data.
PRODUCT FEATURES
Key Features of Inconel 625 Square Bar
Inconel 625 square bar is a solid-solution nickel-chromium-molybdenum alloy supplied to ASTM B446 and ASME SB446. We provide UNS N06625 square bar, bright, cold-drawn, peeled and centerless-ground stock for marine, aerospace, chemical, oil and gas and power service. Every order carries heat-number traceability and EN 10204 3.1 mill test reports.
Inconel 625
Outstanding Pitting Resistance
For example, Inconel 625 square bar resists localized attack in seawater, chlorides and oxidizing acids.
01
High-Temperature Strength
Solid-solution hardening gives Square Bar very high strength without aging.
02
Wide Service Range
In addition, Square Bar keeps dependable properties from cryogenic to about 980 °C.
03
Excellent Weldability
We weld Inconel 625 square bar without preheat and usually without post-weld heat treatment.
04
Fatigue Resistance
Moreover, Square Bar suits cyclic loading and repeated thermal cycling in service.
05
Good Machinability
Inconel 625 square bar machines well in the annealed condition with carbide tooling.
06
Full Traceability
Specifically, every square bar order carries heat numbers and EN 10204 3.1 documents.
07
Custom Supply
We cut Inconel 625 square bar to your diameter, length, finish and packing.
08
WHY CHOOSE US
Why Choose Inconel 625
Inconel 625 square bar needs a supply partner who controls specification, quality and delivery. Southerly Alloy manages your Inconel 625 square bar order from review to shipment with traceable material.
01
Specification Compliance
We match Inconel 625 square bar to your ASTM B446 condition, diameter and finish.
02
Quality and Traceability
Specifically, every square bar batch ships with EN 10204 3.1 certificates and heat numbers.
03
Flexible Supply
In addition, we cut Inconel 625 square bar to custom diameters, lengths and packing.
04
Responsive Service
As a result, our team confirms square bar specifications quickly and ships with full export papers.
MANUFACTURING PROCESS
Reliable Production For Critical Applications
From melting to final check, we process Inconel 625 square bar to your ordered ASTM B446 condition. We control and document each Inconel 625 square bar stage with full heat-number traceability.
01
Raw Material Selection
We weigh nickel, chromium, molybdenum and niobium to make Inconel 625 square bar meet UNS N06625 chemistry.
02
Vacuum Induction Melting
First, we melt the Inconel 625 square bar charge under vacuum to limit gas pickup.
03
Electroslag Remelting
Next, ESR refines the electrode for Inconel 625 square bar to cut inclusions where specified.
04
Hot Forging and Rolling
Then, we forge and hot roll the ingot into Inconel 625 square bar with controlled working.
05
Solution Annealing
After that, we anneal Inconel 625 square bar to develop the strength and corrosion resistance ordered.
06
Cold Working and Finishing
Subsequently, cold drawing, peeling or grinding brings Inconel 625 square bar to tighter size and finish.
07
Dimensional and Surface Checks
We verify Inconel 625 square bar diameter, straightness and surface before release.
08
Final Inspection and MTR
Finally, we confirm Inconel 625 square bar chemistry and properties, then issue the MTR.
Manufacturing Facility
MANUFACTURING CAPABILITY
Advanced Production For Nickel Alloy Products
Specifically, Southerly Alloy supplies Inconel 625 square bar across the common ASTM B446 forms and conditions. We confirm square bar diameter, length, straightness and finish against your order. Moreover, square bar is one section in our Inconel 625 bar and rod program.
20,000+ m²
Factory Area
Specifically, modern production facilities for Inconel 625 square bar and dedicated workshops.
50+
Production Machines
Advanced equipment for Inconel 625 square bar manufacturing.
600 Tons
Monthly Capacity
Inconel 625 square bar output across standard and custom sizes.
30+
Technical Engineers
Experienced engineers for Inconel 625 square bar specification support.
30+ Countries
Export Reach
In addition, reliable logistics for Inconel 625 square bar with full documentation.
QUALITY ASSURANCE
Strict Quality Control From Production To Delivery
Every Inconel 625 square bar batch passes inspection before release. In addition, we check Inconel 625 square bar chemistry, mechanical properties, dimensions and surface under our ISO 9001 system.
01
Material Verification
We confirm Inconel 625 square bar grade and heat against your purchase order.
02
Dimensional Inspection
Specifically, we measure square bar diameter, length and straightness to standard and drawing.
03
Testing and Inspection
In addition, we arrange tensile, impact and NDT tests where your Inconel 625 square bar specification requires.
04
Certification and Traceability
Every square bar delivery includes EN 10204 3.1 certificates with heat numbers.
PRODUCT FORMS
Available Product Forms
Inconel 625 square bar comes in several conditions and variants for different machining and service needs. Specifically, the list below shows the common Square Bar forms we supply.
02
Bright Square Bar
Bright-finished square bar with clean surfaces and edges.
Request Availability →
03
Peeled Square Bar
Peeled square bar with controlled faces for further machining.
Request Availability →
04
Precision Square Bar
Tight-tolerance square bar for turned and machined components.
Request Availability →
05
Forged Square Bar
Forged square bar with a refined grain for heavy load.
Request Availability →
06
Ground Square Bar
Ground square bar with close dimensional control.
Request Availability →
07
Custom Square Bar
Custom square bar cut to your drawing and order quantity.
Request Availability →
APPLICATIONS
Engineered For Demanding Industries
Buyers specify Inconel 625 square bar wherever parts face seawater, chemicals or high heat with mechanical load. Specifically, the applications below show typical Square Bar uses.
Discuss Your Application →
01
Structural Supports
Inconel 625 square bar builds frames and fixtures needing square section.
02
Marine Hardware
Square bar makes brackets in chloride-exposed seawater service.
03
Chemical Equipment
Square bar forms valve bodies and mounts in acid media.
04
Fastener Blanks
We machine square bar into square nuts and special fastener blanks.
05
Aerospace Fixtures
Square bar serves jigs and fixtures for machining cells.
06
Oil and Gas Tooling
Square bar builds subsea tooling and downhole parts.
07
Power Generation
Square bar supports turbine attachments and grid parts.
08
Machining Blanks
Square bar gives CNC machined components a clean start.
TECHNICAL INFORMATION
Technical Specifications
Detailed technical information including chemical composition, mechanical properties, standards and available dimensions.
Chemical Composition
ASTM B446 holds UNS N06625 inside 20.0–23.0% chromium, 8.0–10.0% molybdenum and 3.15–4.15% niobium plus tantalum, and this square bar is quoted to that same window. Consequently, those three additions are what hold this square bar against chlorides and hot acids.
Specifically, the full composition table on the Inconel 625 material page lists every element against its ASTM B446 limit for this square bar.
Mechanical Properties
ASTM B446 furnishes UNS N06625 rod and bar in two heat-treated grades. Grade 1 (annealed) normally serves up to about 593 °C with higher minimum strength. Grade 2 (solution annealed) normally serves above about 593 °C where creep and rupture resistance matter. Specifically, minimum room-temperature properties appear below; Grade 1 values vary with size.
| Grade / Condition | Product Size | Tensile Strength | Yield Strength, 0.2% Offset | Elongation |
|---|---|---|---|---|
| Grade 1 — Annealed (≥871 °C / 1600 °F) | Up to 101.6 mm (4 in.) dia. | ≥120 ksi (827 MPa) | ≥60 ksi (414 MPa) | ≥30% |
| Grade 1 — Annealed (≥871 °C / 1600 °F) | Over 101.6 to 254 mm (4–10 in.) dia. | ≥110 ksi (758 MPa) | ≥50 ksi (345 MPa) | ≥25% |
| Grade 2 — Solution annealed (≥1093 °C / 2000 °F) | All sizes | ≥100 ksi (690 MPa) | ≥40 ksi (276 MPa) | ≥30% |
- ASTM B446 anneals Grade 1 at 871 °C (1600 °F) minimum. The standard solution anneals Grade 2 at 1093 °C (2000 °F) minimum, with or without a stabilization anneal at 982 °C (1800 °F) minimum to improve sensitization resistance. The applicable ASTM B446 grade, size and condition govern final acceptance.
Physical Properties
Published references place the density of this square bar near 8.44 g/cm³, with a melting range of 1290–1350 °C. Moreover, those values describe the annealed condition that this square bar normally ships in.
In addition, the physical properties table on the Inconel 625 material page carries the modulus, the thermal expansion and the remaining design values behind this square bar.
Standards
ASTM B446 is the principal UNS N06625 bar and rod document for this square bar, issued by ASTM International. Moreover, ASME SB446 covers pressure equipment built from this square bar and SAE AMS 5666 covers aerospace procurement.
| Standard | Product or Application |
|---|---|
| ASTM B446 | Nickel-chromium-molybdenum-niobium alloy bar and rod |
| ASME SB446 | ASME counterpart for bar and rod |
| SAE AMS 5666 | Nickel alloy 625 bar, forgings and rings, annealed |
Finally, the full standards list on the Inconel 625 material page adds the European designations and the remaining product documents for this square bar.
Dimensions
Therefore, Inconel 625 square bar dimensions depend on the manufacturing route, standard and order quantity. The table below lists typical supply ranges; please confirm your size in the inquiry.
| Product Form | Typical Supply | Length |
|---|---|---|
| Square Bar | 10–150 mm | Single Random, Double Random or Custom |
| Cold-Drawn Square Bar | 10–120 mm | Custom |
| Bright Square Bar | 10–150 mm | Single Random, Double Random or Custom |
| Peeled Square Bar | 20–150 mm | Custom |
| Precision Square Bar | 10–100 mm | Custom |
| Forged Square Bar | 100–300 mm | Custom |
| Ground Square Bar | 10–100 mm | Custom |
| Custom Square Bar | To drawing | Custom |
Available square bar dimensions depend on the manufacturing route, standard, material condition and order quantity. Please confirm your required square bar diameter, section and length in the inquiry.
Surface Finishes
Therefore, the surface condition decides how this square bar machines and how well it holds up in chloride service. Specifically, we agree the finish on this Inconel 625 square bar with your order.
| Surface Condition | Typical Use |
|---|---|
| Hot Finished | As-hot-worked stock for this square bar, for parts roughed out before finishing. |
| Cold Drawn | Close tolerance on this square bar with a smoother drawn skin. |
| Bright Finished | A brighter surface on this square bar for visible and sealing faces. |
Meanwhile, the surface finishes table on the Inconel 625 material page lists the remaining conditions we quote for this square bar.
Related forms from the same heat cover Inconel 625 Flat Bar, Inconel 625 Hex Bar and Inconel 625 Rectangle Bar when your square bar order needs them.
TECHNICAL DOCUMENTATION
Download Technical Datasheet
Get detailed information including specifications, standards, dimensions and material properties.
HOW TO START
Start Your Order in 6 Simple Steps
From first inquiry to delivered Inconel 625 square bar, our process keeps you informed at every stage. Therefore, most Inconel 625 square bar orders move from inquiry to shipment in under three weeks.
1
Send Your Inquiry
Send your Inconel 625 square bar grade, diameter, length, quantity and standard.
2
Confirm the Specification
State ASTM B446 with the Inconel 625 square bar condition and finish you need.
3
Review the Quotation
Receive pricing for Inconel 625 square bar by dimension, quantity and destination.
4
Confirm the Order
Approve the Inconel 625 square bar technical spec, terms and schedule.
5
Production and Inspection
We make and inspect your Inconel 625 square bar to the agreed specification.
6
Shipment and Documentation
Receive Inconel 625 square bar with EN 10204 3.1 MTC and export papers.
CERTIFICATIONS & QUALITY DOCUMENTATION
Certifications & Quality Documentation
Our production and inspection processes are certified to international standards, and every delivery ships with EN 10204 3.1 mill test certificates.
ISO 9001:2015
Quality Management System
PED 2014/68/EU
Pressure Equipment Directive
ASTM / ASME
Material Standards Compliance
EN 10204 3.1
Mill Test Certificates
FAQ
Frequently Asked Questions
Which ASTM specification applies to Inconel 625 Square Bar?
ASTM B446 and ASME SB446 cover Inconel 625 square bar; SAE AMS 5666 for aerospace.
How is the price of Inconel 625 square bar calculated?
Mainly by weight for Inconel 625 square bar with the prevailing nickel surcharge.
Can Inconel 625 square bar be welded?
Yes. We weld Inconel 625 square bar without preheat and usually without post-weld heat treatment.
Is Inconel 625 square bar hard to machine?
No. Inconel 625 square bar machines in the annealed condition with carbide tooling and rigid setups.
Can Inconel 625 square bar resist seawater attack?
Yes. Inconel 625 square bar resists pitting, crevice corrosion and chloride stress-corrosion cracking.
What applications use Inconel 625 square bar?
Inconel 625 square bar serves marine shafts, aerospace parts, chemical components and oil and gas equipment.
What is your MOQ for Inconel 625 square bar?
One piece for many common Inconel 625 square bar sizes.
What are your trade terms for Inconel 625 square bar?
Mainly FOB for Inconel 625 square bar; EXW and CIF also available.
What is the lead time for Inconel 625 square bar?
Stock Inconel 625 square bar sizes ship in 7-15 days. Custom sizes take a little longer.
Do you provide EN 10204 3.1 or 3.2 certificates for Inconel 625 square bar?
Yes. Every Inconel 625 square bar delivery includes 3.1; 3.2 with third-party endorsement on request.
REQUEST FOR QUOTATION
Need A Custom Alloy Solution?
Inconel 625 square bar from Southerly Alloy covers standard and custom sizes to ASTM B446. Send your Inconel 625 square bar grade, dimensions, quantity and delivery needs to receive a quotation.
Specifically, our team reviews your Inconel 625 square bar specification, confirms the condition and finish, and returns pricing with clear Incoterms. We then produce and inspect your square bar before shipping it with full export documentation.
