01
Precision Rectangle Bar
Tight-tolerance rectangular bar for machined Inconel 718 parts.
Request Availability →Inconel 718 Rectangle Bar
High-strength precipitation-hardened nickel-chromium-iron rectangle bar for aerospace, oil and gas and high-temperature service.
Mill-Certified Material
Inconel 718 rectangle bar carries full heat-number traceability on every order.
Custom Bar Supply
Specifically, we cut Inconel 718 rectangle bar to your sizes, lengths and heat-treatment conditions.
Fast Global Delivery
Therefore, our team ships Inconel 718 rectangle bar worldwide with complete export papers.
PRODUCT OVERVIEW
About Inconel 718 Rectangle Bar
Inconel 718 rectangle bar is a precipitation-hardenable nickel-chromium-iron alloy. Inconel 718 rectangle bar reaches very high strength through solution treatment and a controlled double age.
We supply Inconel 718 rectangle bar as hot-worked, cold-drawn, peeled or centerless-ground stock to ASTM B637. Every Inconel 718 rectangle bar order carries heat-number traceability and EN 10204 3.1 documents for incoming inspection.
In addition, Inconel 718 rectangle bar shares the UNS N07718 chemistry detailed on our Inconel 718 material page for alloy data.
PRODUCT FEATURES
Key Features of Inconel 718 Rectangle Bar
Inconel 718 rectangle bar is a precipitation-hardenable nickel-chromium-iron alloy supplied to ASTM B637 and AMS 5662/5663. We provide UNS N07718 rectangle bar in solution-treated and aged conditions for aerospace, oil and gas, power generation and cryogenic service. Every Inconel 718 rectangle bar order carries heat-number traceability and EN 10204 3.1 mill test reports.
Inconel 718
Very High Strength
For example, aged Rectangle Bar reaches 185 ksi tensile strength with 150 ksi yield.
01
Wide Temperature Range
In addition, Rectangle Bar keeps dependable properties from -253 °C to about 700 °C.
02
Outstanding Fatigue Resistance
Moreover, Rectangle Bar suits cyclic loading in gas turbine and aerospace parts.
03
Good Weldability
We weld Inconel 718 rectangle bar in the solution-treated condition, then age the weldment where needed.
04
Oxidation Resistance
Inconel 718 rectangle bar resists oxidation in hot air up to about 980 °C.
05
Cryogenic Toughness
Specifically, Rectangle Bar retains strength and toughness for cryogenic tanks and tooling.
06
Full Traceability
Specifically, every Inconel 718 rectangle bar order carries heat numbers and EN 10204 3.1 documents.
07
Custom Supply
We cut Inconel 718 rectangle bar to your size, length, condition and packing.
08
WHY CHOOSE US
Why Choose Inconel 718
Inconel 718 rectangle bar needs a supply partner who controls specification, quality and delivery. Southerly Alloy manages your Inconel 718 rectangle bar order from review to shipment with traceable material.
01
Specification Compliance
We match Inconel 718 rectangle bar to your ASTM B637 or AMS condition and finish.
02
Quality and Traceability
Specifically, every Inconel 718 rectangle bar batch ships with EN 10204 3.1 certificates and heat numbers.
03
Flexible Supply
In addition, we cut Inconel 718 rectangle bar to custom sizes, lengths and packing.
04
Responsive Service
As a result, our team confirms Inconel 718 rectangle bar specifications quickly and ships with full export papers.
MANUFACTURING PROCESS
Reliable Production For Critical Applications
From melting to final check, we process Inconel 718 rectangle bar to your ordered ASTM B637 condition. We control and document each Inconel 718 rectangle bar stage with full heat-number traceability.
01
Raw Material Selection
We weigh nickel, chromium, iron and niobium to make Inconel 718 rectangle bar meet UNS N07718 chemistry.
02
Vacuum Induction Melting
First, we melt the Inconel 718 rectangle bar charge under vacuum to limit gas pickup.
03
ESR or VAR Remelting
Next, ESR or VAR refines the electrode for Inconel 718 rectangle bar to cut inclusions where specified.
04
Hot Forging and Rolling
Then, we forge and hot roll the ingot into Inconel 718 rectangle bar with controlled working.
05
Solution Treatment
After that, we solution treat Inconel 718 rectangle bar near 940–1010 °C to prepare the structure for aging.
06
Double Aging
Subsequently, a two-step age near 718 °C and 621 °C develops the characteristic strength of Inconel 718 rectangle bar.
07
Dimensional and Surface Checks
We verify Inconel 718 rectangle bar size, straightness and surface before release.
08
Final Inspection and MTR
Finally, we confirm Inconel 718 rectangle bar chemistry and properties, then issue the MTR.
Manufacturing Facility
MANUFACTURING CAPABILITY
Advanced Production For Nickel Alloy Products
Specifically, Southerly Alloy supplies Inconel 718 rectangle bar across the common ASTM B637 forms and conditions. We confirm rectangle bar size, length, straightness and finish against your order. Moreover, rectangle bar is one section in our Inconel 718 bar and rod program.
20,000+ m²
Factory Area
Specifically, modern production facilities for Inconel 718 rectangle bar and dedicated workshops.
50+
Production Machines
Advanced equipment for Inconel 718 rectangle bar manufacturing.
600 Tons
Monthly Capacity
Inconel 718 rectangle bar output across standard and custom sizes.
30+
Technical Engineers
Experienced engineers for Inconel 718 rectangle bar specification support.
30+ Countries
Export Reach
In addition, reliable logistics for Inconel 718 rectangle bar with full documentation.
QUALITY ASSURANCE
Strict Quality Control From Production To Delivery
Every Inconel 718 rectangle bar batch passes inspection before release. In addition, we check Inconel 718 rectangle bar chemistry, mechanical properties, dimensions and surface under our ISO 9001 system.
01
Material Verification
We confirm Inconel 718 rectangle bar grade and heat against your purchase order.
02
Dimensional Inspection
Specifically, we measure rectangle bar size, length and straightness to standard and drawing.
03
Testing and Inspection
In addition, we arrange tensile, hardness and NDT tests where your Inconel 718 rectangle bar specification requires.
04
Certification and Traceability
Every Inconel 718 rectangle bar delivery includes EN 10204 3.1 certificates with heat numbers.
PRODUCT FORMS
Available Product Forms
Inconel 718 rectangle bar comes in several conditions and variants for different machining and service needs. Specifically, the list below shows the common Inconel 718 Rectangle Bar forms we supply.
02
Cold-Drawn Rectangle Bar
Cold-drawn rectangular bar with closer tolerances for Inconel 718.
Request Availability →
03
Bright Rectangle Bar
Bright-finished rectangular bar with clean surfaces for Inconel 718.
Request Availability →
04
Peeled Rectangle Bar
Peeled rectangular bar with controlled faces for Inconel 718.
Request Availability →
05
Ground Rectangle Bar
Ground rectangular bar with close control for Inconel 718 parts.
Request Availability →
06
Forged Rectangle Bar
Forged rectangular bar for heavy Inconel 718 sections.
Request Availability →
07
Custom Rectangle Bar
Custom rectangular bar produced to your Inconel 718 drawing.
Request Availability →
APPLICATIONS
Engineered For Demanding Industries
Buyers specify Inconel 718 rectangle bar wherever parts need very high strength under heat, cold or cyclic load. Specifically, the applications below show typical Inconel 718 Rectangle Bar uses.
Discuss Your Application →
01
Aerospace Members
Inconel 718 rectangle bar forms structural members and fittings.
02
Turbine Parts
Rectangle bar makes spacers and Wear pads in hot sections.
03
Oil and Gas Tooling
Rectangle bar builds downhole tool bodies and wear parts.
04
Cryogenic Service
Rectangle bar serves low-temperature rigs and supports.
05
Power Generation
Rectangle bar forms turbine and boiler related Inconel 718 components.
06
Machined Components
Rectangle bar gives precision parts an aged, stable blank.
07
Welded Assemblies
Rectangle bar builds fabricated Inconel 718 structures and frames.
08
Custom Fabrications
Rectangle bar machines into bespoke retention hardware.
TECHNICAL INFORMATION
Technical Specifications
Detailed technical information including chemical composition, mechanical properties, standards and available dimensions.
Chemical Composition
ASTM B637 fixes 50.0–55.0% nickel, 17.0–21.0% chromium, 4.75–5.50% niobium plus tantalum and 0.65–1.15% titanium for UNS N07718, and this rectangle bar is quoted to the same window. Therefore, niobium and titanium are the elements that age-harden this rectangle bar.
Consequently, the full composition table on the Inconel 718 material page lists every element against its ASTM B637 limit for this rectangle bar.
Mechanical Properties
The minimum room-temperature values below apply to UNS N07718 bar in the solution-treated and precipitation-hardened condition. Transverse and heavy-section requirements are lower per AMS 5662; the applicable standard governs final acceptance.
| Condition | Product Size | Tensile Strength | Yield Strength, 0.2% Offset | Elongation | Hardness |
|---|---|---|---|---|---|
| Solution Treated + Precipitation Hardened (AMS 5662 / AMS 5663) | Up to 254 mm (10 in.) | ≥185 ksi (1276 MPa) | ≥150 ksi (1034 MPa) | ≥12% | ≥331 HB |
- The standard double age holds the rectangle bar near 718 °C (1325 °F) for 8 hours, furnace cools to 621 °C (1150 °F), and holds 18 hours total before air cooling.
Physical Properties
Published references record a density near 8.19 g/cm³ and a melting range of 1260–1336 °C for this rectangle bar. Moreover, design work on this rectangle bar starts from the aged condition rather than the annealed one.
In addition, the physical properties table on the Inconel 718 material page carries the modulus, the thermal expansion and the remaining design values behind this rectangle bar.
Heat Treatment
Precipitation hardening is what separates Inconel 718 rectangle bar from solid-solution alloys. We supply the rectangle bar in the condition below that your application needs.
| Condition | Typical Treatment |
|---|---|
| Solution Treated | Held near 940–1010 °C (1725–1850 °F), then air cooled |
| Solution + Age Hardened | Two-step age near 718 °C (1325 °F) and 621 °C (1150 °F) for full strength |
| Stress Relieved | Available when specified for the application |
| Custom Condition | Heat treatment according to the agreed specification |
Standards
ASTM B637 is the principal UNS N07718 bar and rod document for this rectangle bar, issued by ASTM International. Moreover, ASME SB637 covers pressure equipment built from this rectangle bar and SAE AMS 5662 and 5663 cover aerospace procurement.
| Standard | Product or Application |
|---|---|
| ASTM B637 | Nickel alloy bar, rod and forgings for high-temperature service |
| ASME SB637 | ASME counterpart for pressure equipment |
| SAE AMS 5662 / 5663 | Nickel alloy 718 bar, forgings and rings |
Overall, the full standards list on the Inconel 718 material page adds the European designations and the remaining product documents for this rectangle bar.
Dimensions
Therefore, Inconel 718 rectangle bar dimensions depend on the manufacturing route, standard and order quantity. The table below lists typical supply ranges; please confirm your size in the inquiry.
| Product Form | Typical Supply | Length |
|---|---|---|
| Rectangle Bar | 10–250 mm wide × 5–100 mm thick | Single Random, Double Random or Custom |
| Precision Rectangle Bar | 10–200 mm wide × 5–80 mm thick | Custom |
| Cold-Drawn Rectangle Bar | 10–150 mm wide × 5–60 mm thick | Custom |
| Bright Rectangle Bar | 10–250 mm wide × 5–100 mm thick | Single Random, Double Random or Custom |
| Peeled Rectangle Bar | 20–250 mm wide × 5–100 mm thick | Custom |
| Ground Rectangle Bar | 10–200 mm wide × 5–80 mm thick | Custom |
| Forged Rectangle Bar | 50–400 mm wide × 20–200 mm thick | Custom |
| Custom Rectangle Bar | To drawing | Custom |
Available rectangle bar dimensions depend on the manufacturing route, standard, material condition and order quantity. Please confirm your required rectangle bar size, section and length in the inquiry.
Surface Finishes
Therefore, the surface condition decides how this rectangle bar machines and how closely it holds size on a finishing cell. Specifically, we agree the finish on this Inconel 718 rectangle bar with your order.
| Surface Condition | Typical Use |
|---|---|
| Hot Finished | As-hot-worked surface on this rectangle bar, for parts machined all over. |
| Rough Turned | A turned surface on this rectangle bar with allowance for later finishing. |
| Peeled | Uniform diameter on this rectangle bar with a machined skin. |
Meanwhile, the surface finishes table on the Inconel 718 material page lists the remaining conditions we quote for this rectangle bar.
Related forms from the same heat cover Inconel 718 Round Bar, Inconel 718 Special-Profile Bar and Inconel 718 Square Bar when your rectangle bar order needs them.
TECHNICAL DOCUMENTATION
Download Technical Datasheet
Get detailed information including specifications, standards, dimensions and material properties.
HOW TO START
Start Your Order in 6 Simple Steps
From first inquiry to delivered Inconel 718 rectangle bar, our process keeps you informed at every stage. Therefore, most Inconel 718 rectangle bar orders move from inquiry to shipment in under three weeks.
1
Send Your Inquiry
Send your Inconel 718 rectangle bar grade, size, length, quantity and standard.
2
Confirm the Specification
State ASTM B637 or AMS with the Inconel 718 rectangle bar condition and finish you need.
3
Review the Quotation
Receive pricing for Inconel 718 rectangle bar by dimension, quantity and destination.
4
Confirm the Order
Approve the Inconel 718 rectangle bar technical spec, terms and schedule.
5
Production and Inspection
We make and inspect your Inconel 718 rectangle bar to the agreed specification.
6
Shipment and Documentation
Receive Inconel 718 rectangle bar with EN 10204 3.1 MTC and export papers.
CERTIFICATIONS & QUALITY DOCUMENTATION
Certifications & Quality Documentation
Our production and inspection processes are certified to international standards, and every delivery ships with EN 10204 3.1 mill test certificates.
ISO 9001:2015
Quality Management System
PED 2014/68/EU
Pressure Equipment Directive
ASTM / ASME
Material Standards Compliance
EN 10204 3.1
Mill Test Certificates
FAQ
Frequently Asked Questions
Which ASTM specification applies to Inconel 718 Rectangle Bar?
ASTM B637 and ASME SB637 cover Inconel 718 rectangle bar; SAE AMS 5662/5663 serve aerospace.
How is the price of Inconel 718 rectangle bar calculated?
Mainly by weight for Inconel 718 rectangle bar with the prevailing nickel surcharge.
Can Inconel 718 rectangle bar be welded?
Yes. We weld Inconel 718 rectangle bar in the solution-treated condition and age the weldment afterwards where needed.
Is Inconel 718 rectangle bar hard to machine?
We rough-machine Inconel 718 rectangle bar in the solution-treated state, then age it to final strength.
What heat treatment does Inconel 718 rectangle bar need?
Solution treating near 960 °C plus the double age develops full strength in Inconel 718 rectangle bar.
What applications use Inconel 718 rectangle bar?
Inconel 718 rectangle bar serves aerospace fasteners, gas turbine parts, downhole tools and cryogenic equipment.
What is your MOQ for Inconel 718 rectangle bar?
One piece for many common Inconel 718 rectangle bar sizes.
What are your trade terms for Inconel 718 rectangle bar?
Mainly FOB for Inconel 718 rectangle bar; EXW and CIF also available.
What is the lead time for Inconel 718 rectangle bar?
Stock Inconel 718 rectangle bar sizes ship in 7-15 days. Custom sizes take a little longer.
Do you provide EN 10204 3.1 or 3.2 certificates for Inconel 718 rectangle bar?
Yes. Every Inconel 718 rectangle bar delivery includes 3.1; 3.2 with third-party endorsement on request.
REQUEST FOR QUOTATION
Need A Custom Alloy Solution?
Inconel 718 rectangle bar from Southerly Alloy covers standard and custom sizes to ASTM B637. Send your Inconel 718 rectangle bar grade, dimensions, quantity and delivery needs to receive a quotation.
Specifically, our team reviews your Inconel 718 rectangle bar specification, confirms the condition and finish, and returns pricing with clear Incoterms. We then produce and inspect your Inconel 718 rectangle bar before shipping it with full export documentation.
