01
Hastelloy C-22 ERNiCrMo-10 Bare Wire
AWS A5.14 solid nickel-chromium-molybdenum-tungsten filler for GTAW and GMAW.
Request Availability →Hastelloy C-22 Welding Wire
ERNiCrMo-10 bare wire and ENiCrMo-10 electrodes for joining Hastelloy C-22 and its dissimilar steel fabrications.
One Chemistry, Two Packaged Forms
ERNiCrMo-10 supplies the bare form of this Hastelloy C-22 welding wire, and ENiCrMo-10 supplies the covered electrode.
Deposit Carries the Parent Chemistry
Moreover, chromium, molybdenum and tungsten ride through the ERNiCrMo-10 deposit of this Hastelloy C-22 welding wire into service.
Dissimilar Joints Covered
Furthermore, the same deposit joins this Hastelloy C-22 welding wire to stainless steel and to carbon steel.
PRODUCT OVERVIEW
About Hastelloy C-22 Welding Wire
Hastelloy C-22 welding wire covers the fillers classified for joining UNS N06022 fabrications. This Hastelloy C-22 welding wire runs as ERNiCrMo-10 per AWS A5.14 in bare form. Its covered electrode runs as ENiCrMo-10 per AWS A5.11.
We supply Hastelloy C-22 welding wire as straight TIG rods, wound MIG spools and sealed electrode packs. The deposit matches the parent metal in nitric acid and wet chlorine duty, and the same deposit suits dissimilar joints to stainless and carbon steel.
Meanwhile, the base-metal chemistry behind this Hastelloy C-22 welding wire sits on our Hastelloy C-22 material page for weld procedure work.
PRODUCT FEATURES
Key Features of Hastelloy C-22 Welding Wire
Hastelloy C-22 welding wire arrives in UNS N06022, the chromium-rich nickel-chromium-molybdenum-tungsten grade whose chromium above 20% carries nitric acid and wet chlorine while molybdenum and tungsten hold reducing acids in check. We supply ASTM B574 welding wire as ERNiCrMo-10 bare wire, TIG rods and MIG spools for pharmaceutical reactors, pickling lines and flue-gas desulfurisation hardware. Every Hastelloy C-22 welding wire consignment travels with heat-number traceability, EN 10204 3.1 mill test reports and full export documentation.
Hastelloy C-22
Matching Deposit
For example, an ERNiCrMo-10 deposit from this Hastelloy C-22 welding wire carries the parent corrosion resistance into the weld.
01
Oxidising Duty Deposit Performance
Specifically, the ERNiCrMo-10 deposit of this Hastelloy C-22 welding wire holds up where nitric acid attacks a lower-chromium weld.
02
Dissimilar Joining Range
Moreover, this Hastelloy C-22 welding wire joins the grade to stainless steel and carbon steel on one classification.
03
Classified Electrode
In addition, the ENiCrMo-10 electrode of this Hastelloy C-22 welding wire tests at 690 MPa minimum all-weld strength.
04
Three Process Routes
GTAW, GMAW and SMAW each have a matching classification inside this Hastelloy C-22 welding wire family.
05
Trade-Name Availability
The same chemistry of this Hastelloy C-22 welding wire sells as INCONEL Filler Metal 622 from Special Metals.
06
Sealed Packing
We ship this Hastelloy C-22 welding wire in sealed tubes and packs so the surface arrives weld-ready.
07
Heat-Number Traceability
Every coil or pack of this Hastelloy C-22 welding wire travels with EN 10204 3.1 papers.
08
WHY CHOOSE US
Why Choose Hastelloy C-22
A joint has to keep the corrosion performance of the parent metal, so classification decides everything for Hastelloy C-22 welding wire. In addition, we confirm the AWS class, diameter and packing of this Hastelloy C-22 welding wire before quoting.
01
Duty Read Before Pricing
We record the medium, its concentration and its temperature for your Hastelloy C-22 welding wire before proposing a delivery state.
02
Certificates Tied to the Heat
Specifically, EN 10204 3.1 papers, heat numbers and hardness records follow each Hastelloy C-22 welding wire consignment.
03
Trial Pieces and Container Lots
In addition, this Hastelloy C-22 welding wire flows through one route whether you order a single length or a container lot.
04
Terms Stated in Writing
Quotations for this Hastelloy C-22 welding wire name the medium, section, finish and document set rather than leaving them open.
MANUFACTURING PROCESS
Reliable Production For Critical Applications
Filler production for Hastelloy C-22 welding wire runs from charge selection through to all-weld-metal testing. We log each step of this Hastelloy C-22 welding wire route against a heat number.
01
Charge Selection
We weigh electrolytic nickel, chromium, molybdenum and tungsten, then balance the iron this Hastelloy C-22 welding wire needs inside the ERNiCrMo-10 window.
02
Melting and Casting
First, the charge for this Hastelloy C-22 welding wire melts and casts into electrode stock.
03
Rolling and Drawing
Next, rolling and drawing bring this Hastelloy C-22 welding wire down to the ordered filler diameter.
04
Cleaning and Descale
Then, pickling and mechanical cleaning leave this Hastelloy C-22 welding wire bright and weld-ready.
05
Spooling and Cutting
After that, we wind spools and cut straight TIG lengths of this Hastelloy C-22 welding wire.
06
Electrode Extrusion
For ENiCrMo-10, we press the covering onto this Hastelloy C-22 welding wire core wire.
07
Baking and Sealing
Subsequently, we bake and seal covered electrodes of this Hastelloy C-22 welding wire against moisture pickup.
08
Weld Test and Release
Finally, all-weld-metal checks confirm the class of this Hastelloy C-22 welding wire before we issue the certificate.
Manufacturing Facility
MANUFACTURING CAPABILITY
Advanced Production For Nickel Alloy Products
Holdings and made-to-order lots of Hastelloy C-22 welding wire leave on a single schedule. Moreover, this Hastelloy C-22 welding wire belongs to our bar and rod program.
20,000+ m²
Factory Area
Hot working, annealing, drawing and pickling lines for Hastelloy C-22 welding wire share one site.
50+
Production Machines
Units covering hot working, annealing, drawing and pickling for this Hastelloy C-22 welding wire.
600 Tons
Monthly Capacity
Hastelloy C-22 welding wire output across stock and bespoke lots.
30+
Technical Engineers
Metallurgists who set the anneal plan and hardness scope of this Hastelloy C-22 welding wire against your duty.
30+ Countries
Export Reach
In addition, sealed export packing carries this Hastelloy C-22 welding wire to buyers on five continents.
QUALITY ASSURANCE
Strict Quality Control From Production To Delivery
No Hastelloy C-22 welding wire leaves the yard before its heat has cleared our ISO 9001 inspection route. In addition, we check this Hastelloy C-22 welding wire against the chemistry, hardness, dimensions and surface the order names.
01
Heat Identification
We confirm the grade and heat number of this Hastelloy C-22 welding wire against your purchase order.
02
Hardness Verification
Specifically, sour-service lots of this Hastelloy C-22 welding wire go against the 35 HRC ceiling per NACE MR0175.
03
Dimensional Verification
In addition, the diameter, length and runout of this Hastelloy C-22 welding wire go against the ordered tolerance class.
04
Certificate Assembly
Every consignment of this Hastelloy C-22 welding wire ships with EN 10204 3.1 papers keyed to its heat.
PRODUCT FORMS
Available Product Forms
Conditions and variants of Hastelloy C-22 welding wire cover different machining and service needs. In addition, the list below sets out the Hastelloy C-22 Welding Wire variants we quote most often.
02
Hastelloy C-22 TIG Filler Rods
Straight ERNiCrMo-10 rods cut to 1000 mm in sealed tubes.
Request Availability →
03
Hastelloy C-22 MIG Spools
ERNiCrMo-10 wire wound on spools for semi-automatic GMAW.
Request Availability →
04
Hastelloy C-22 SAW Wire
ERNiCrMo-10 wire sized for submerged-arc joining of thick sections.
Request Availability →
05
Hastelloy C-22 ENiCrMo-10 Electrodes
AWS A5.11 covered electrodes with a matching core for dissimilar joints.
Request Availability →
06
Hastelloy C-22 Custom Winding
Filler wound against your spool size, weight and length schedule.
Request Availability →
APPLICATIONS
Engineered For Demanding Industries
Buyers choose Hastelloy C-22 welding wire where a joint has to keep the corrosion performance of the parent metal. Therefore, the applications below show where this Hastelloy C-22 welding wire serves.
Discuss Your Application →
01
Hastelloy C-22 C-22 Fabrication Welding
Filler for joints across UNS N06022 fabrications in oxidising duty.
02
Hastelloy C-22 Nitric Acid Vessel Welds
Welding vessel internals that face nitric acid service.
03
Hastelloy C-22 Scrubber Fabrication
Welding absorber shells, spray headers and mist eliminator supports.
04
Hastelloy C-22 Reactor Overlay Work
Deposits laid on steel where oxidising-acid resistance is needed.
05
Hastelloy C-22 Dissimilar Joints to Stainless Steel
Joints between this grade and austenitic stainless work.
06
Hastelloy C-22 Joints to Carbon Steel
Nickel filler joints to carbon and low-alloy steel fabrications.
07
Hastelloy C-22 Etch Tank Overlay
Deposits laid on steel where ferric chloride resistance is needed.
08
Hastelloy C-22 Bleach Washer Welds
Welding washer internals in chlorine dioxide bleaching plants.
TECHNICAL INFORMATION
Technical Specifications
Detailed technical information including chemical composition, mechanical properties, standards and available dimensions.
Chemical Composition
ASTM B574 sets chromium between 20.0% and 22.5% in this welding wire, roughly six points above the C-276 window, while molybdenum at 12.5–14.5% and tungsten at 2.5–3.5% carry the reducing side of the same duty. Besides, carbon at 0.015% maximum and silicon at 0.08% maximum keep carbides out of the grain boundaries of this welding wire, so a welded joint holds its corrosion resistance without a post-weld anneal.
For the full element-by-element limits behind this welding wire, open the composition breakdown recorded on the Hastelloy C-22 material page.
Mechanical Properties
All-weld-metal figures for the fillers supplied with Hastelloy C-22 welding wire appear below. Note that the bare wire classification carries no tensile minimum from AWS, so only the covered electrode holds a classified floor.
| Product (all-weld metal) | AWS Class | Tensile Strength | Elongation |
|---|---|---|---|
| ERNiCrMo-10 bare wire | AWS A5.14, UNS N06022 | 690–790 MPa (100–115 ksi), typical | 36–44%, typical |
| ENiCrMo-10 covered electrode | AWS A5.11 | ≥690 MPa (100 ksi), min. | 25%, min. |
- The A5.14 NiCrMo classes are classified on chemistry, so the ERNiCrMo-10 classification carries no tensile minimum and the all-weld-metal figures in the test report govern the release. Moreover, the ENiCrMo-10 electrode sets a floor of 690 MPa with 25% elongation on a 4d gauge, and its proof stress holds at 350 MPa minimum. Besides, ERNiCrMo-10 doubles as an overmatching filler for the lower-chromium grades of the same family.
Physical Properties
Identification data for both deliveries, bare wire and covered electrode, appears below for this Hastelloy C-22 welding wire.
| Property | Value |
|---|---|
| Filler Metal | ERNiCrMo-10 (AWS A5.14) |
| Covered Electrode | ENiCrMo-10 (AWS A5.11) |
| UNS | N06022 (bare wire) |
| ISO Designation | S Ni 6022 (bare) / E Ni 6022 (covered) |
| Trade Name | INCONEL Filler Metal 622 |
| Chromium Window | 20.0–22.5% in both forms |
| Molybdenum | 12.5–14.5% in both forms |
| Tungsten | 2.5–3.5% in both forms |
| Silicon Limit | 0.08% max. (bare) / 0.20% max. (covered) |
| Nickel | Balance in both forms |
Filler Metal Classifications
Specifically, classification data for the two products below sets out the deposit chemistry behind this Hastelloy C-22 welding wire.
| Product | AWS Class | Key Composition | Typical Strength | Best Suited For |
|---|---|---|---|---|
| Bare wire | ERNiCrMo-10 (A5.14) / S Ni 6022 | Ni balance, Cr 20.0–22.5%, Mo 12.5–14.5%, W 2.5–3.5%, C 0.015% max. | 690–790 MPa (100–115 ksi) typical | GTAW primary, GMAW general |
| Covered electrode | ENiCrMo-10 (A5.11) / E Ni 6022 | Ni balance, Cr 20.0–22.5%, Mo 12.5–14.5%, W 2.5–3.5%, Si 0.20% max. | ≥690 MPa (100 ksi) AWS min. | SMAW repair, dissimilar joints and overlays |
Standards
The bare filler for this welding wire runs as ERNiCrMo-10 under AWS A5.14, a classification issued by the American Welding Society. Moreover, AWS A5.11 covers the ENiCrMo-10 electrode, and ASME SFA-5.14 mirrors the bare filler document for pressure work. Besides, INCONEL Filler Metal 622 from Special Metals carries the same chemistry of this grade under a trade name.
| Standard | Product or Application |
|---|---|
| AWS A5.14 | ERNiCrMo-10 bare filler wire, UNS N06022 |
| AWS A5.11 | ENiCrMo-10 covered electrode |
| ASME SFA-5.14 | ASME version of the bare filler specification |
Finally, the full standards list that the Hastelloy C-22 material page holds adds the pressure documents, the European designations and the other product documents behind this welding wire.
Dimensions
Dimensions of Hastelloy C-22 welding wire follow the route, the document and the order quantity. Therefore, typical supply ranges sit in the table below, so please confirm your sizes in the inquiry.
| Product Form | Typical Supply | Length |
|---|---|---|
| TIG Filler Rod (GTAW) | 1.6 / 2.4 / 3.2 mm × 1000 mm | 5 kg tube |
| MIG Wire (GMAW) | 0.9 / 1.2 mm | Spool |
| SAW Wire and Strip | 2.5–4.0 mm dia. | Coil |
| Straight Cut Wire | 0.8–3.2 mm dia. | Straight lengths |
| Covered Electrode (SMAW) | 2.4 / 3.2 / 4.0 mm | Sealed pack |
| Custom Winding | To drawing | Custom |
Available sizes of this Hastelloy C-22 welding wire depend on the route, the document, the state and the lot size. Please confirm the size, section and length you need for this welding wire in the inquiry.
Surface Finishes
Surface condition decides how this welding wire performs in nitric acid trains, ferric chloride pickling lines and pharmaceutical reactors, and most stock leaves our yard solution annealed and pickled so it arrives ready for oxidising duty. Specifically, we settle the finish on this Hastelloy C-22 welding wire before the order leaves the desk.
| Surface Condition | Typical Use |
|---|---|
| Clean Bright | The standard surface for bare ERNiCrMo-10 welding wire, free of drawing lubricant. |
| Spool Wound | Layer-wound welding wire so the GMAW feeder runs without tangling. |
| Coated | A light carrier film on this welding wire that protects it during downstream redrawing. |
Meanwhile, the surface finishes table recorded on the Hastelloy C-22 material page lists the remaining conditions quoted for this welding wire.
Related forms from the same heat cover Hastelloy C-22 Wire, Hastelloy C-22 Bright Bar and Hastelloy C-22 Centreless-Ground Rod when your welding wire order needs them.
TECHNICAL DOCUMENTATION
Download Technical Datasheet
Get detailed information including specifications, standards, dimensions and material properties.
HOW TO START
Start Your Order in 6 Simple Steps
A single coordinator carries your Hastelloy C-22 welding wire order from the first question through to loading. Therefore, most orders for this Hastelloy C-22 welding wire travel from quotation to dispatch inside three weeks.
1
Send the Medium Data
Give us the medium, its concentration and its temperature, plus the size, quantity and standard this Hastelloy C-22 welding wire will face.
2
Fix the State
Then we set the annealing step, the hardness basis and the tolerance band for this Hastelloy C-22 welding wire.
3
Review the Offer
Pricing for this Hastelloy C-22 welding wire arrives by size, quantity and destination port.
4
Approve the Order
You confirm the specification, the terms and the schedule of this Hastelloy C-22 welding wire in writing.
5
Witness Points Agreed
Any third-party inspection or hardness review of this Hastelloy C-22 welding wire is booked before production starts.
6
Dispatch and Documents
This Hastelloy C-22 welding wire arrives with mill papers, a packing list and the certificate set.
CERTIFICATIONS & QUALITY DOCUMENTATION
Certifications & Quality Documentation
Our production and inspection processes are certified to international standards, and every delivery ships with EN 10204 3.1 mill test certificates.
ISO 9001:2015
Quality Management System
PED 2014/68/EU
Pressure Equipment Directive
ASTM / ASME
Material Standards Compliance
EN 10204 3.1
Mill Test Certificates
FAQ
Frequently Asked Questions
Which AWS classification covers the filler for this Hastelloy C-22 welding wire?
ERNiCrMo-10 per AWS A5.14 covers the bare form of this Hastelloy C-22 welding wire, and ENiCrMo-10 per AWS A5.11 covers the covered electrode.
Which base metals does this Hastelloy C-22 welding wire serve?
UNS N06022 fabrications take this Hastelloy C-22 welding wire, and the same deposit handles dissimilar joints to stainless and carbon steel.
Is there a tensile minimum behind the bare wire classified for this grade?
No. The A5.14 NiCrMo classes are classified on chemistry rather than strength, so we report all-weld-metal values from the test certificate.
Does a joint in this grade need a post-weld heat treatment?
No. Carbon stays at 0.015% max in the parent metal and 0.02% max in the electrode covering, so most joints enter service without a furnace pass.
How is the price of this Hastelloy C-22 welding wire calculated?
Weight in kilograms drives pricing for this Hastelloy C-22 welding wire, with the prevailing nickel, molybdenum and tungsten quotations applied on the order date.
What is your MOQ for this Hastelloy C-22 welding wire?
A single sealed tube or spool covers many common diameters of this Hastelloy C-22 welding wire.
What are your trade terms for this Hastelloy C-22 welding wire?
We quote FOB as standard for this Hastelloy C-22 welding wire, and EXW, CIF or DAP terms follow once the destination is fixed.
What is the lead time for this Hastelloy C-22 welding wire?
Expect 7 to 15 days on stock sizes of this Hastelloy C-22 welding wire, and custom winding takes longer.
Do you provide EN 10204 3.1 or 3.2 certificates for this Hastelloy C-22 welding wire?
Every batch of this Hastelloy C-22 welding wire ships with EN 10204 3.1, and a 3.2 endorsement is booked through the order.
What should I include in an enquiry for this Hastelloy C-22 welding wire?
Please send the diameter, AWS class, pack weight, quantity and destination so we can quote this Hastelloy C-22 welding wire accurately.
REQUEST FOR QUOTATION
Need A Custom Alloy Solution?
We quote Hastelloy C-22 welding wire by AWS class, diameter and pack weight. Send the classification and quantity you need to price this Hastelloy C-22 welding wire.
We walk through your Hastelloy C-22 welding wire specification, settle the hardness basis and the document scope, then return pricing with clear terms. Production follows the signed specification, and every consignment of this Hastelloy C-22 welding wire leaves with the complete paper set.
