01
Incoloy 825 Ground Round Rod
Ground rounds ready for spindle and plunger work.
Request Availability →Incoloy 825 Centreless-Ground Rod
Incoloy 825 centreless-ground rod to ASTM B425 with tight diameter and straightness for acid-plant pump spindles.
One B425 Grade, One UNS
Every heat of this Incoloy 825 centreless-ground rod reads N08825, with molybdenum and copper reported on the certificate.
Hardness Records for Sour Duty
Moreover, NACE MR0175 orders for this Incoloy 825 centreless-ground rod carry hardness data keyed to each heat.
Anneal Range on the Record
Furthermore, the release papers record the 927–1010 °C anneal actually used for this Incoloy 825 centreless-ground rod.
PRODUCT OVERVIEW
About Incoloy 825 Centreless-Ground Rod
Incoloy 825 centreless-ground rod arrives in UNS N08825, the titanium-stabilised nickel-iron-chromium grade whose molybdenum and copper additions face reducing and oxidising acids. Seawater, brine and H2S-bearing streams also sit inside the envelope of this Incoloy 825 centreless-ground rod.
We supply Incoloy 825 centreless-ground rod to ASTM B425 and ASME SB425 in hot-worked, solution-annealed and cold-drawn conditions. Your order for this 825 centreless-ground rod carries heat-number records, hardness papers where sour duty calls for them and EN 10204 3.1 paperwork for goods-in checks. Besides, we agree the anneal and finish on the centreless-ground rod before we book the heat.
Meanwhile, the chemistry and the sour-service data behind Incoloy 825 centreless-ground rod sit on our Incoloy 825 material page for cross-reference.
PRODUCT FEATURES
Key Features of Incoloy 825 Centreless-Ground Rod
Incoloy 825 centreless-ground rod arrives in UNS N08825, the titanium-stabilised nickel-iron-chromium grade whose molybdenum and copper additions face reducing and oxidising acids. We provide ASTM B425 centreless-ground rod ground to a tight diameter and straightness band for acid plants, sour-service projects and seawater-cooled equipment. Every Incoloy 825 centreless-ground rod order carries heat-number traceability, EN 10204 3.1 mill test reports and full export documentation.
Incoloy 825
Sulfuric and Phosphoric Acid Resistance
For example, molybdenum and copper in this Incoloy 825 centreless-ground rod cover reducing acid streams across a wide band.
01
Chloride SCC Resistance
Specifically, nickel at 38.0–46.0% keeps this Incoloy 825 centreless-ground rod austenitic against chloride stress-corrosion cracking.
02
NACE Sour Qualification
Moreover, UNS N08825 sits inside NACE MR0175 / ISO 15156, so this Incoloy 825 centreless-ground rod enters H2S duty with a hardness record.
03
Titanium-Stabilised Structure
Besides, titanium ties up carbon in this Incoloy 825 centreless-ground rod, so sensitization does not follow welding.
04
Pitting and Crevice Resistance
In turn, molybdenum lifts the localised corrosion resistance of this Incoloy 825 centreless-ground rod in seawater.
05
Cold-Work Strength
Drawing adds yield strength above the annealed floor of this Incoloy 825 centreless-ground rod where shafts need it.
06
Weldable Without Post-Weld Heat Treatment
Standard arc practice on this Incoloy 825 centreless-ground rod clears most fabrications without any furnace pass.
07
Non-Magnetic Behaviour
Finally, this Incoloy 825 centreless-ground rod stays non-magnetic below −196 °C for magnetically sensitive assemblies.
08
WHY CHOOSE US
Why Choose Incoloy 825
Sour-service spindles and plungers leave no room for diameter drift in Incoloy 825 centreless-ground rod. Moreover, we confirm the ground tolerance and the hardness record of this 825 centreless ground rod before pricing.
01
Duty Read Before Pricing
We record the medium, concentration and temperature your Incoloy 825 centreless-ground rod will meet before proposing a delivery condition.
02
Certificates Tied to the Heat
Specifically, EN 10204 3.1 papers, heat numbers and hardness records follow each Incoloy 825 centreless-ground rod delivery.
03
Trial Pieces and Container Lots
In addition, this Incoloy 825 centreless-ground rod flows through one route whether you order one length or a container lot.
04
Terms Stated in Writing
Quotations for this Incoloy 825 centreless-ground rod name the medium, section, finish and document set instead of leaving them open.
MANUFACTURING PROCESS
Reliable Production For Critical Applications
Bar production for Incoloy 825 centreless-ground rod runs from charge weighing to final packing. Our team logs each stage of this 825 centreless-ground rod route against its heat number.
01
Charge Weighing
We weigh electrolytic nickel, chromium, iron, molybdenum and copper so this 825 centreless ground rod meets the B425 analysis.
02
Melting and Refining
First, the charge for this Incoloy 825 centreless-ground rod melts and refines under AOD practice that holds carbon low.
03
Titanium Stabilisation
Next, titanium joins the melt of this Incoloy 825 centreless-ground rod so carbon stays tied up against intergranular attack.
04
Hot Reduction
Then, forging and rolling reduce the ingot to this Incoloy 825 centreless-ground rod section.
05
Solution Annealing
After that, 927–1010 °C annealing and rapid cooling restore the corrosion resistance of this Incoloy 825 centreless-ground rod.
06
Pickling and Descale
Subsequently, acid pickling leaves this Incoloy 825 centreless-ground rod scale-free for fabrication.
07
Cold Finishing
We then draw, turn or grind this Incoloy 825 centreless-ground rod to the ordered size and finish.
08
Testing and Release
Finally, chemistry, hardness and dimensional checks clear this Incoloy 825 centreless-ground rod for dispatch.
Manufacturing Facility
MANUFACTURING CAPABILITY
Advanced Production For Nickel Alloy Products
Stock lots and made-to-order lengths of Incoloy 825 centreless-ground rod leave on one schedule. Moreover, this Incoloy 825 centreless-ground rod sits inside our bar and rod program.
20,000+ m²
Factory Area
Melting, forging, annealing and pickling bays serve Incoloy 825 centreless-ground rod under one roof.
50+
Production Machines
Units covering hot working, annealing, drawing and pickling for this Incoloy 825 centreless-ground rod.
600 Tons
Monthly Capacity
Incoloy 825 centreless-ground rod output across stock and bespoke lots.
30+
Technical Engineers
Metallurgists who set the anneal plan and hardness scope of this Incoloy 825 centreless-ground rod against your duty.
30+ Countries
Export Reach
In addition, sealed export packing carries this Incoloy 825 centreless-ground rod worldwide.
QUALITY ASSURANCE
Strict Quality Control From Production To Delivery
No Incoloy 825 centreless-ground rod leaves the yard before its heat has cleared our ISO 9001 inspection route. In addition, we check this 825 centreless-ground rod against the chemistry, hardness, dimensions and surface the order names.
01
Heat Identification
We confirm the grade and heat number of this Incoloy 825 centreless-ground rod against your purchase order.
02
Hardness Verification
Specifically, sour-service lots of this Incoloy 825 centreless-ground rod go against the 35 HRC ceiling per NACE MR0175.
03
Dimensional Verification
In addition, the diameter, length and runout of this Incoloy 825 centreless-ground rod go against the ordered tolerance class.
04
Certificate Assembly
Every consignment of this Incoloy 825 centreless-ground rod ships with EN 10204 3.1 papers keyed to its heat.
PRODUCT FORMS
Available Product Forms
Conditions and variants of Incoloy 825 centreless-ground rod cover different machining and service needs. In addition, the list below sets out the Incoloy 825 Centreless-Ground Rod variants we quote most often.
02
Incoloy 825 Precision-Ground Rod
Precision-ground rod for the tightest diameter bands.
Request Availability →
03
Incoloy 825 Ground Hex Bar
Ground hexagons with controlled flats for fittings.
Request Availability →
04
Incoloy 825 Straightness-Controlled Rod
Rod straightened and checked against a stated runout limit.
Request Availability →
05
Incoloy 825 Annealed Ground Rod
Ground stock re-annealed to the ordered delivery state.
Request Availability →
06
Incoloy 825 Custom Ground Rod
Custom ground stock finished against your tolerance band.
Request Availability →
APPLICATIONS
Engineered For Demanding Industries
Incoloy 825 centreless-ground rod suits duty where acid attack and chloride cracking meet one component. In addition, the applications below show where this 825 centreless-ground rod serves.
Discuss Your Application →
01
Incoloy 825 Acid Circulation Pump Spindles
Spindles running in bearings on sulfuric circulation pumps.
02
Incoloy 825 Sour-Service Pump Plungers
Plungers held to a tight diameter for H2S-bearing pumps.
03
Incoloy 825 Acid-Shop Precision Locating Pins
Pins holding fit through acid-plant assembly and service.
04
Incoloy 825 Seawater Valve Stems
Stems needing close running fits through packing on seawater lines.
05
Incoloy 825 Acid-Duty Thermowell Mandrels
Mandrels machined from ground stock for drilling thermowells.
06
Incoloy 825 Brine Instrument Probe Bodies
Probe bodies machined from ground stock.
07
Incoloy 825 Acid-Plant Gauge Hardware
Setting and checking hardware for acid-plant workshops.
08
Incoloy 825 Custom Ground Parts
Bespoke components turned and ground to your callout.
TECHNICAL INFORMATION
Technical Specifications
Detailed technical information including chemical composition, mechanical properties, standards and available dimensions.
Chemical Composition
ASTM B425 holds nickel between 38.0% and 46.0% and chromium between 19.5% and 23.5% for this centreless-ground rod, with iron at 22.0% minimum. Moreover, molybdenum at 2.5–3.5% and copper at 1.5–3.0% form the acid-resisting pair behind this centreless-ground rod, while titanium at 0.6–1.2% stabilises the structure against intergranular attack.
For the complete element-by-element limits, open the composition breakdown held on the Incoloy 825 material page for this centreless-ground rod.
Mechanical Properties
The minimum room-temperature values below follow the rod and bar table of ASTM B425 for UNS N08825. Consequently, the ordered condition and hardness basis govern final acceptance of Incoloy 825 centreless-ground rod.
| Condition and Grade | Tensile Strength, min. | Yield Strength (0.2%), min. | Elongation, min. |
|---|---|---|---|
| Annealed — UNS N08825 | ≥85 ksi (586 MPa) | ≥35 ksi (241 MPa) | 30% |
- ASTM B425 sets one annealed condition for rod and bar, with the yield minimum applying from 2.4 mm diameter upward and hardness at 200 HB maximum. Moreover, strength above the annealed floor comes from cold work only, because UNS N08825 does not respond to aging, so sour-service orders carry a hardness record against the 35 HRC ceiling.
Physical Properties
Published references place this centreless-ground rod at a density near 8.14 g/cm³ with a melting range of 1370–1400 °C. Moreover, the Curie temperature sits below −196 °C, so this centreless-ground rod stays non-magnetic even in cryogenic seawater service. Besides, the austenitic matrix keeps these values stable across the whole annealed range.
Meanwhile, the physical properties table on the Incoloy 825 material page holds the modulus, the thermal expansion and the remaining design values behind this centreless-ground rod.
Heat Treatment
The solution anneal is the specification-defining step for this grade, because rapid cooling after 927–1010 °C restores the corrosion resistance the media demand. In addition, we supply this Incoloy 825 centreless-ground rod in whichever condition your duty calls for.
| Condition | Typical Treatment |
|---|---|
| Solution Annealed | Held at 927–1010 °C (1700–1850 °F), then cooled rapidly to restore full corrosion resistance |
| Hot-Worked | Delivered as-rolled or as-forged, with the solution anneal agreed where the order calls for it |
| Cold-Drawn | Drawn after annealing, with the reduction recorded so the higher yield strength is documented |
| Sour-Service Release | NACE MR0175 orders carry a per-lot hardness record against the 35 HRC ceiling |
Standards
ASTM B425 is the principal rod and bar document for this centreless-ground rod, published by ASTM International, and its scope names UNS N08825 alone. Moreover, ASME SB425 covers pressure equipment while VdTÜV 432 serves German vessel work. Besides, DIN 17752, BS 3076 NA16 and ISO 9723 serve European, British and international orders for this centreless-ground rod.
| Standard | Product or Application |
|---|---|
| ASTM B425 / ASME SB425 | Nickel-iron-chromium-molybdenum-copper rod and bar, UNS N08825 |
| DIN 17752 / BS 3076 NA16 | European and British bar documents |
| VdTÜV 432 / ISO 9723 | German data sheet and international bar document |
Finally, the full standards list on the Incoloy 825 material page adds the pressure documents, the European designations and the remaining product documents behind this centreless-ground rod.
Dimensions
Dimensions of Incoloy 825 centreless-ground rod follow the manufacturing route, the document and the order quantity. Therefore, the table below lists typical supply ranges, so please confirm your sizes in the inquiry.
| Product Form | Typical Supply | Length |
|---|---|---|
| Centreless-Ground Rod | 3–100 mm dia., tight tolerance | Cut to length |
| Ground Round Rod | 3–80 mm dia. | Cut to length |
| Precision-Ground Rod | 3–60 mm dia. | Cut to length |
| Ground Hex Bar | 10–60 mm A/F | Cut to length |
| Straightness-Controlled Rod | 3–100 mm dia. | Cut to length |
| Custom Ground Rod | To drawing | Custom |
Available sizes of this Incoloy 825 centreless-ground rod depend on route, document, condition and lot size. Please confirm your required centreless-ground rod size, section and length in the inquiry.
Surface Finishes
Finish decides how this centreless-ground rod behaves across acid plants, seawater circuits and sour-service skids, and most stock ships annealed and pickled so the stabilised surface reaches your shop intact. Specifically, we fix the finish on this Incoloy 825 centreless-ground rod before the order is released.
| Surface Condition | Typical Use |
|---|---|
| Centreless Ground | Ground diameter and straightness on this centreless-ground rod for pump shafts and plungers. |
| Polished | Reduced roughness on this centreless-ground rod for product-contact and visible components. |
| Annealed and Pickled | Annealing followed by acid descaling leaves this centreless-ground rod scale-free for sulfuric and seawater duty. |
Meanwhile, the surface finishes table on the Incoloy 825 material page lists the remaining conditions we quote for this centreless-ground rod.
Related forms from the same heat cover Incoloy 825 Cold-Drawn Bar, Incoloy 825 Flat Bar and Incoloy 825 Forged Bar when your centreless-ground rod order needs them.
TECHNICAL DOCUMENTATION
Download Technical Datasheet
Get detailed information including specifications, standards, dimensions and material properties.
HOW TO START
Start Your Order in 6 Simple Steps
One coordinator carries your Incoloy 825 centreless-ground rod order from first question to loading. Therefore, most orders for this 825 centreless-ground rod travel from quotation to dispatch inside three weeks.
1
Send the Medium Data
Give the medium, concentration, temperature, size, quantity and standard this Incoloy 825 centreless-ground rod will face.
2
Fix the Condition
Then we set the anneal, hardness basis and tolerance for this Incoloy 825 centreless-ground rod.
3
Review the Offer
Receive pricing for this Incoloy 825 centreless-ground rod by size, quantity and destination port.
4
Approve the Order
Approve the specification, terms and schedule of this Incoloy 825 centreless-ground rod in writing.
5
Witness Points Agreed
We book any third-party inspection or hardness review of this Incoloy 825 centreless-ground rod before production starts.
6
Dispatch and Documents
Receive this Incoloy 825 centreless-ground rod with mill papers, packing list and the certificate set.
CERTIFICATIONS & QUALITY DOCUMENTATION
Certifications & Quality Documentation
Our production and inspection processes are certified to international standards, and every delivery ships with EN 10204 3.1 mill test certificates.
ISO 9001:2015
Quality Management System
PED 2014/68/EU
Pressure Equipment Directive
ASTM / ASME
Material Standards Compliance
EN 10204 3.1
Mill Test Certificates
FAQ
Frequently Asked Questions
Which standard covers this Incoloy 825 centreless-ground rod?
ASTM B425 and ASME SB425 govern this Incoloy 825 centreless-ground rod, and the B425 scope names UNS N08825 alone for round, square, hex and rectangular sections.
Is this Incoloy 825 centreless-ground rod suitable for sulfuric acid duty?
Yes. Molybdenum and copper give this Incoloy 825 centreless-ground rod its resistance across a wide band of sulfuric concentrations, subject to your stream temperature.
Does this Incoloy 825 centreless-ground rod qualify for sour service?
Yes. NACE MR0175 / ISO 15156 lists UNS N08825, and we record hardness per heat against the 35 HRC ceiling.
Which anneal does this Incoloy 825 centreless-ground rod receive?
Solution annealing runs at 927–1010 °C with rapid cooling, and the release papers name the temperature actually used on your lot.
How is the price of this Incoloy 825 centreless-ground rod calculated?
Pricing follows weight for this Incoloy 825 centreless-ground rod, with the nickel, molybdenum and copper quotations fixed on the date you receive the offer.
What is your MOQ for this Incoloy 825 centreless-ground rod?
A single bar covers many common sizes of this Incoloy 825 centreless-ground rod, so trial lengths are welcome before container orders.
What are your trade terms for this Incoloy 825 centreless-ground rod?
Quotations default to FOB for this Incoloy 825 centreless-ground rod, and EXW or CIF terms are quoted when you ask for them.
What is the lead time for this Incoloy 825 centreless-ground rod?
Stock sizes of this Incoloy 825 centreless-ground rod dispatch in 7 to 15 days, while made-to-order annealed heats need about 25 days.
Do you provide EN 10204 3.1 or 3.2 certificates for this Incoloy 825 centreless-ground rod?
Yes. Every heat of this Incoloy 825 centreless-ground rod ships with 3.1, and a 3.2 endorsement is booked through the order.
What information should an enquiry for this Incoloy 825 centreless-ground rod include?
Please send the medium, concentration, temperature, section, quantity and destination so we can quote this Incoloy 825 centreless-ground rod accurately.
REQUEST FOR QUOTATION
Need A Custom Alloy Solution?
Incoloy 825 centreless-ground rod is quoted by diameter, tolerance and runout. Send the tolerance band you need to receive pricing for this 825 centreless ground rod.
Specifically, we review your Incoloy 825 centreless-ground rod specification, confirm the hardness basis and document scope, and return pricing with clear terms. Production then follows the signed specification, and each consignment of this Incoloy 825 centreless-ground rod ships with the complete paper set.
