01
Hastelloy C-276 Annealed C-276 Wire
Soft wire that forms and coils before fabrication.
Request Availability →Hastelloy C-276 Wire
Hastelloy C-276 wire to DIN 17753 in annealed and spring-temper states for FGD mesh, screens and springs.
Two Tempers from One Grade
This Hastelloy C-276 wire ships annealed or spring temper across one UNS N10276 chemistry.
Working Window Documented
Moreover, published data gives this Hastelloy C-276 wire a working band from −200 to +400 °C.
Wet Chlorine Capability
Furthermore, molybdenum and tungsten let this Hastelloy C-276 wire serve chlorine and bleach circuits.
PRODUCT OVERVIEW
About Hastelloy C-276 Wire
Hastelloy C-276 wire arrives in UNS N10276, the nickel-molybdenum-chromium-tungsten grade that resists wet chlorine, hydrochloric acid and mixed acid-chloride streams. Solutions of chlorine dioxide, hypochlorite and chloride-bearing flue gas also sit inside the envelope of this Hastelloy C-276 wire.
We supply Hastelloy C-276 wire to ASTM B574 and ASME SB574 in hot-worked, solution-annealed and cold-drawn conditions. Your order for this Hastelloy C-276 wire carries heat-number records, a solution-anneal record and EN 10204 3.1 paperwork for goods-in checks. Besides, we agree the solution-anneal record and the finish on the wire before we book a heat of UNS N10276.
Meanwhile, the chemistry and the sour-service data behind Hastelloy C-276 wire sit on our Hastelloy C-276 material page for cross-reference.
Applications for Hastelloy C-276 wire follow the bar and rod program, where sections, conditions and document sets are quoted together.
PRODUCT FEATURES
Key Features of Hastelloy C-276 Wire
Hastelloy C-276 wire arrives in UNS N10276, the nickel-molybdenum-chromium-tungsten grade whose molybdenum and tungsten face reducing acids while chromium covers oxidising media. We provide ASTM B574 wire from 0.05 to 21 mm in annealed and spring-temper states for wet chlorine plants, hydrochloric acid service and flue-gas desulfurisation hardware. Every Hastelloy C-276 wire order carries heat-number traceability, EN 10204 3.1 mill test reports and full export documentation.
Hastelloy C-276
Two Delivery Tempers
For example, this Hastelloy C-276 wire ships annealed at 758–1100 MPa or spring temper at 1379–1700 MPa.
01
Demister Mesh Capability
Specifically, this Hastelloy C-276 wire weaves into pads that catch droplets inside scrubber towers.
02
Chlorine and Bleach Suitability
In addition, this Hastelloy C-276 wire holds up in wet chlorine, hypochlorite and chlorine dioxide.
03
Stress-Relief After Forming
Moreover, a 400–450 °C relief pass follows cold forming of this Hastelloy C-276 wire where the order calls for it.
04
Non-Magnetic Behaviour
This Hastelloy C-276 wire stays practically non-magnetic at ambient temperature in service.
05
Wide Working Window
Published data gives this Hastelloy C-276 wire a working band from −200 to +400 °C.
06
Fine Diameter Range
We draw this Hastelloy C-276 wire down to 0.05 mm for instrument and filtration work.
07
Consistent Coiling
Every coil of this Hastelloy C-276 wire is wound with steady layering so feeders never tangle.
08
WHY CHOOSE US
Why Choose Hastelloy C-276
Demister mesh and spring work ask for temper control first in Hastelloy C-276 wire. Specifically, we fix the diameter, temper and coil weight of this Hastelloy C-276 wire before we quote it.
01
Duty Read Before Pricing
We record the medium, concentration and temperature your Hastelloy C-276 wire will meet before proposing a delivery condition.
02
Certificates Tied to the Heat
Specifically, EN 10204 3.1 papers, heat numbers and hardness records follow each Hastelloy C-276 wire delivery.
03
Trial Pieces and Container Lots
In addition, this Hastelloy C-276 wire flows through one route whether you order one length or a container lot.
04
Terms Stated in Writing
Quotations for this Hastelloy C-276 wire name the medium, section, finish and document set instead of leaving them open.
MANUFACTURING PROCESS
Reliable Production For Critical Applications
Wire production for Hastelloy C-276 wire runs from charge weighing to final spooling. We log every stage of this Hastelloy C-276 wire route against its heat number.
01
Charge Weighing
We weigh electrolytic nickel, chromium, molybdenum and tungsten to the B574 window before this Hastelloy C-276 wire melts.
02
Melting and Casting
First, the charge for this Hastelloy C-276 wire melts and casts into electrode stock.
03
Hot Rolling to Rod
Next, hot rolling reduces cast stock into drawing rod for this Hastelloy C-276 wire.
04
Annealing
Then, we anneal and descale this Hastelloy C-276 wire between reductions.
05
Wire Drawing
After that, successive dies pull this Hastelloy C-276 wire down to the ordered diameter.
06
Intermediate Anneals
Because this Hastelloy C-276 wire work-hardens, we soften it between drawing passes.
07
Temper and Stress Relief
Subsequently, the last reduction sets this Hastelloy C-276 wire to the ordered temper, and a relief pass follows where specified.
08
Coiling and Release
Finally, we wind this Hastelloy C-276 wire onto coils and spools and clear the heat for dispatch.
Manufacturing Facility
MANUFACTURING CAPABILITY
Advanced Production For Nickel Alloy Products
Stock lots and made-to-order lengths of Hastelloy C-276 wire leave on one schedule. Moreover, this Hastelloy C-276 wire sits inside our bar and rod program.
20,000+ m²
Factory Area
Melting, forging, annealing and pickling bays serve Hastelloy C-276 wire under one roof.
50+
Production Machines
Units covering hot working, annealing, drawing and pickling for this Hastelloy C-276 wire.
600 Tons
Monthly Capacity
Hastelloy C-276 wire output across stock and bespoke lots.
30+
Technical Engineers
Metallurgists who set the anneal plan and hardness scope of this Hastelloy C-276 wire against your duty.
30+ Countries
Export Reach
In addition, sealed export packing carries this Hastelloy C-276 wire worldwide.
QUALITY ASSURANCE
Strict Quality Control From Production To Delivery
No Hastelloy C-276 wire leaves the yard before its heat has cleared our ISO 9001 inspection route. In addition, we check this Hastelloy C-276 wire against the chemistry, hardness, dimensions and surface the order names.
01
Heat Identification
We confirm the grade and heat number of this Hastelloy C-276 wire against your purchase order.
02
Hardness Verification
Specifically, sour-service lots of this Hastelloy C-276 wire go against the 35 HRC ceiling per NACE MR0175.
03
Dimensional Verification
In addition, the diameter, length and runout of this Hastelloy C-276 wire go against the ordered tolerance class.
04
Certificate Assembly
Every consignment of this Hastelloy C-276 wire ships with EN 10204 3.1 papers keyed to its heat.
PRODUCT FORMS
Available Product Forms
Conditions and variants of Hastelloy C-276 wire cover different machining and service needs. In addition, the list below sets out the Hastelloy C-276 Wire variants we quote most often.
02
Hastelloy C-276 Spring-Temper Wire
Heavily reduced wire that holds a set in spring work.
Request Availability →
03
Hastelloy C-276 Woven Mesh Wire
Wire sized for weaving demister pads and filtration screens.
Request Availability →
04
Hastelloy C-276 Fine C-276 Wire
Fine wire for instrument and sensor parts in chlorine duty.
Request Availability →
05
Hastelloy C-276 Straightened and Cut Wire
Wire straightened and cut for heading and pin production.
Request Availability →
06
Hastelloy C-276 Custom C-276 Wire
Custom diameters, tempers and packing produced against your callout.
Request Availability →
APPLICATIONS
Engineered For Demanding Industries
Hastelloy C-276 wire suits service where an aggressive medium must sit inside a small cross section. Consequently, the applications below show where this Hastelloy C-276 wire serves.
Discuss Your Application →
01
Hastelloy C-276 FGD Demister Mesh
Wire woven into demister pads inside flue-gas scrubber towers.
02
Hastelloy C-276 Wet Chlorine Filter Mesh
Mesh wire filtering moist chlorine gas streams.
03
Hastelloy C-276 Hydrochloric Filtration Mesh
Mesh wire filtering hydrochloric acid process liquors.
04
Hastelloy C-276 Chlorine Dioxide Spring Work
Springs holding valves and instruments in set inside bleaching plants.
05
Hastelloy C-276 Hypochlorite Screen Cloth
Woven cloth screening hypochlorite process streams.
06
Hastelloy C-276 Acid Mist Cage Mesh
Woven mesh forming cages and guards in acid process plants.
07
Hastelloy C-276 Sour-Service Lock Wire
Wire locking fasteners inside H2S-bearing equipment.
08
Hastelloy C-276 Woven Basket Mesh
Mesh wire forming baskets for acid pickling plants.
TECHNICAL INFORMATION
Technical Specifications
Detailed technical information including chemical composition, mechanical properties, standards and available dimensions.
Chemical Composition
ASTM B574 holds nickel at 57.0% minimum and chromium between 14.5% and 16.5% for this wire, with molybdenum at 15.0–17.0% as the leading addition. Moreover, tungsten at 3.0–4.5% reinforces the passive film carried by this wire, while carbon at 0.010% maximum and silicon at 0.08% maximum starve the grain-boundary precipitates that embrittle welded joints.
For the complete element-by-element limits, open the composition breakdown held on the Hastelloy C-276 material page for this wire.
Mechanical Properties
Typical room-temperature ranges for UNS N10276 wire appear below, taken from published Alloy Wire International data. Therefore the ordered temper and diameter decide the acceptance values for Hastelloy C-276 wire.
| Temper | Typical Tensile Strength | Typical Use |
|---|---|---|
| Annealed (soft) | 758–1100 MPa (110–160 ksi) | Forming and coiling before fabrication |
| Spring temper | 1379–1700 MPa (200–247 ksi) | Springs, clips and retained-set parts |
- Published Alloy Wire International data gives UNS N10276 wire these ranges, and the same source sets the working window of this alloy between −200 and +400 °C. Consequently, the ordered temper and diameter govern final release on this Hastelloy C-276 wire.
Physical Properties
Published references place this wire at a density near 8.89 g/cm³ with a melting range of 1325–1370 °C. Moreover, the nickel-rich matrix keeps this wire practically non-magnetic at ambient temperature, which suits instrument and sensor assemblies. Besides, the solid-solution structure holds these values across the whole solution-annealed range.
Meanwhile, the physical properties table on the Hastelloy C-276 material page holds the modulus, the thermal expansion and the remaining design values behind this wire.
Delivery Conditions
Hastelloy C-276 wire ships in the delivery states below. Specifically, the ordered temper is the delivered state, and the certificate records any stress-relief pass that followed.
| Delivery State | Typical Diameter | Notes |
|---|---|---|
| Annealed (soft) | 0.05–21 mm | Softest state, formed and coiled before fabrication |
| Spring temper | 0.10–8.0 mm | Heavily reduced, holds a set in spring work |
| Stress relieved | 0.10–12 mm | Relieved at 400–450 °C for two hours and air cooled after forming |
Delivery note: UNS N10276 takes no strength from aging, so the ordered temper is the delivered state, and published working temperatures from −200 to +400 °C cover the duty this Hastelloy C-276 wire usually serves.
Standards
ASTM B574 from ASTM International defines the grade chemistry but stops short of wire, so this wire ships against DIN 17753 and ISO 9724. Moreover, VdTÜV 400 serves German pressure work in wire of this wire. Besides, no separate aerospace wire document exists for UNS N10276, since AMS 5750 reaches bars, forgings and rings rather than wire.
| Standard | Product or Application |
|---|---|
| DIN 17753 | German wire document for UNS N10276 |
| ISO 9724 | ISO wire document for nickel alloys |
| VdTÜV 400 | German pressure vessel data sheet covering wire |
Finally, the full standards list on the Hastelloy C-276 material page adds the pressure documents, the European designations and the remaining product documents behind this wire.
Dimensions
Dimensions of Hastelloy C-276 wire follow the manufacturing route, the document and the order quantity. Therefore, the table below lists typical supply ranges, so please confirm your sizes in the inquiry.
| Product Form | Typical Supply | Length |
|---|---|---|
| Wire (Coil or Spool) | 0.05–21 mm dia., typical | Coil, spool or custom |
| Fine Wire | 0.05–0.80 mm dia. | Spool |
| Spring-Temper Wire | 0.10–8.0 mm dia. | Coil or spool |
| Woven Mesh Wire | 0.10–3.0 mm dia. | Coil |
| Straightened and Cut Wire | 1.0–10 mm dia. | Straight lengths |
| Custom Wire | To drawing | Custom |
Available sizes of this Hastelloy C-276 wire depend on route, document, condition and lot size. Please confirm your required wire size, section and length in the inquiry.
Surface Finishes
Finish decides how this wire behaves across wet chlorine streams, chlorine dioxide bleach plants and FGD scrubbers, and most stock ships solution annealed and pickled so the surface reaches your shop ready for acid service. Specifically, we fix the finish on this Hastelloy C-276 wire before the order is released.
| Surface Condition | Typical Use |
|---|---|
| Bright Annealed | Protective-atmosphere annealing leaves this wire oxide-free and ready to redraw. |
| Pickled Only | Acid cleaning descaled this wire after the anneal without further working. |
| Coated | A light carrier film on this wire that protects it during downstream redrawing. |
Meanwhile, the surface finishes table on the Hastelloy C-276 material page lists the remaining conditions we quote for this wire.
Related forms from the same heat cover Hastelloy C-276 Bright Bar, Hastelloy C-276 Centreless-Ground Rod and Hastelloy C-276 Cold-Drawn Bar when your wire order needs them.
TECHNICAL DOCUMENTATION
Download Technical Datasheet
Get detailed information including specifications, standards, dimensions and material properties.
HOW TO START
Start Your Order in 6 Simple Steps
One coordinator carries your Hastelloy C-276 wire order from first question to loading. Therefore, most orders for this Hastelloy C-276 wire travel from quotation to dispatch inside three weeks.
1
Send the Medium Data
Give the medium, concentration, temperature, size, quantity and standard this Hastelloy C-276 wire will face.
2
Fix the Condition
Then we set the anneal, hardness basis and tolerance for this Hastelloy C-276 wire.
3
Review the Offer
Receive pricing for this Hastelloy C-276 wire by size, quantity and destination port.
4
Approve the Order
Approve the specification, terms and schedule of this Hastelloy C-276 wire in writing.
5
Witness Points Agreed
We book any third-party inspection or hardness review of this Hastelloy C-276 wire before production starts.
6
Dispatch and Documents
Receive this Hastelloy C-276 wire with mill papers, packing list and the certificate set.
CERTIFICATIONS & QUALITY DOCUMENTATION
Certifications & Quality Documentation
Our production and inspection processes are certified to international standards, and every delivery ships with EN 10204 3.1 mill test certificates.
ISO 9001:2015
Quality Management System
PED 2014/68/EU
Pressure Equipment Directive
ASTM / ASME
Material Standards Compliance
EN 10204 3.1
Mill Test Certificates
FAQ
Frequently Asked Questions
Which specification covers this Hastelloy C-276 wire?
DIN 17753, ISO 9724 and VdTÜV 400 govern this Hastelloy C-276 wire, because ASTM B574 defines the chemistry but stops short of wire.
What diameters does this Hastelloy C-276 wire span?
Product wire of this Hastelloy C-276 wire typically runs from 0.05 to 21 mm, depending on the ordered temper.
Which delivery states are available for this Hastelloy C-276 wire?
This wire ships annealed at 758–1100 MPa or spring temper at 1379–1700 MPa, plus a 400–450 °C relief pass on request.
Does this Hastelloy C-276 wire respond to aging?
No. UNS N10276 hardens only through cold work, so the temper you order is the state this Hastelloy C-276 wire arrives in.
How is the price of this Hastelloy C-276 wire calculated?
Pricing follows weight for this Hastelloy C-276 wire, with the prevailing nickel, molybdenum and tungsten quotations applied on the order date.
What is your MOQ for this Hastelloy C-276 wire?
One spool covers many common diameters of this Hastelloy C-276 wire.
What are your trade terms for this Hastelloy C-276 wire?
Quotations default to FOB for this Hastelloy C-276 wire, and EXW or CIF terms are quoted when you ask for them.
What is the lead time for this Hastelloy C-276 wire?
Stock sizes of this Hastelloy C-276 wire dispatch in 7 to 15 days, while custom drawing takes longer.
Do you provide EN 10204 3.1 or 3.2 certificates for this Hastelloy C-276 wire?
Yes. Every coil of this Hastelloy C-276 wire ships with 3.1, and a 3.2 endorsement is booked through the order.
What information should an enquiry for this Hastelloy C-276 wire include?
Please send the diameter, temper, coil weight, standard and destination so we can quote this Hastelloy C-276 wire accurately.
REQUEST FOR QUOTATION
Need A Custom Alloy Solution?
We quote Hastelloy C-276 wire by diameter, temper and coil weight to DIN 17753. Send those figures with your quantity so we can price this Hastelloy C-276 wire.
Specifically, we review your Hastelloy C-276 wire specification, confirm the hardness basis and document scope, and return pricing with clear terms. Production then follows the signed specification, and each consignment of this Hastelloy C-276 wire ships with the complete paper set.
